SMX13XX

Laser Diode, Multimode or Single-mode, 13XX nm

Key Features:

  • Wavelength: 13XX nm
  • Output Power:  Up to 21000mW (21W)
  • High output power and dynamic range
  • High efficiency
  • Thermally stable
  • Standard low-cost packaging
  • Custom design capability
  • DFB & SOA configurations available

 

There are many configurations and options available. If you do not see exactly what you need below, please contact us!

Need Quantities? Have a question?

POPULAR CONFIGURATIONS:

 
Picture
Part Number
Part Description
Datasheet
Price
Lead Time
 
brass colored laser diode housing with 14 pins and a fiber attached to either end 14BF-290

High Power SOA, 1310nm, single mode, single junction, 9 µm fiber core, FC/APC connector, 1 m long, 14 pin Butterfly Package

 

Inquire

Get Quote
brass colored laser diode housing with 14 pins and a fiber attached 14BF-450

High Power DFB Laser, 1310nm, single mode, 8um core diameter fiber with FC/APC connector, 14 Pin Butterfly Package

 

Inquire

Get Quote
brass colored laser diode housing with 14 pins and a fiber attached 14BF-125

Singlemode Laser Diode, 1310nm, 275mW (500mW QCW), Singlemode Fiber Coupled 14-pin Butterfly package, 9µm, 0.22NA, 1m long fiber w/ FC/PC connector, PD, Thermistor, TEC

 

Inquire

Get Quote
brass colored 4CM laser diode package with electrical pins, output optical fiber and white top label 4CM-111

Laser Diode, 1310nm, 21000mW, Fiber Coupled 8-pin 4 Chip Module package, 400µm, 0.22NA, 1m long fiber w/ SMA connector, PD, Thermistor, Aiming beam

 

Inquire

Get Quote
brass colored 4PN laser diode package with electrical pins, output optical fiber and white top label 4PN-116

Laser Diode, 1320nm, 4500mW (14100mW QCW), Fiber Coupled 4-pin Module package, 105µm, 0.22NA or 0.15NA, 1m long fiber w/ SMA connector, PD

 

Inquire

Get Quote
brass colored 4PN laser diode package with electrical pins, output optical fiber and white top label 4PN-117

Laser Diode, 1375nm, 4300mW (14100mW QCW), Fiber Coupled 4-pin Module package, 105µm, 0.22NA or 0.15NA, 1m long fiber w/ SMA connector, PD

 

Inquire

Get Quote
a fiber-coupled TO laser diode package small circular device with attached cable with connectors TO9F-111

Singlemode Laser Diode, 1310nm, 200mW (650mW QCW), Fiber Coupled 9mm package, 9µm, 0.22NA, 1m long fiber w/ FC/PC connector, PD, Thermistor

 

Inquire

Get Quote
brass colored laser diode b-mount, rectangular block B-103

Laser Diode, 1310nm, 5700mW (18600mW QCW), 95µm emitter, B-mount package

 

Inquire

Get Quote
brass colored laser diode b-mount, rectangular block B-123

Laser Diode, 1350nm, 5600mW (18600mW QCW), 95µm emitter, B-mount package

 

Inquire

Get Quote
brass colored laser diode b-mount, rectangular block B-163

Singlemode Laser Diode, 1320nm, 800mW, 4µm emitter, B-mount package

 

Inquire

Get Quote
brass colored laser diode c-mount, square with circular through hole C-124

Laser Diode, 1380nm, 5600mW (15000mW QCW), 95µm emitter, C-mount package

 

Inquire

Get Quote
brass colored laser diode c-mount, square with circular through hole C-130

Laser Diode, 1325nm, 5700mW (15000mW QCW), 95µm emitter, C-mount package

 

Inquire

Get Quote
gold colored square plate with diode chips and electrical connectors COC-181

High Power RSOA, 1310nm, 450mW, 4µm emitter, Chip on Carrier

 

Inquire

Get Quote
gold colored square plate with diode chips and electrical connectors COC-288

High Power SOA, 1310nm, 450mW, 4µm emitter, Chip on Carrier

 

Inquire

Get Quote
gold colored square plate with diode chips and electrical connectors COC-289

High Power SOA, 1310nm, 450mW, 4µm emitter, Chip on Carrier

 

Inquire

Get Quote
gold colored square plate with diode chips and electrical connectors COC-290

High Power SOA, 1310nm, 450mW, 4µm emitter, Chip on Carrier

 

Inquire

Get Quote
image of several free-space and fiber-coupled laser diode package types C-155

Singlemode Laser Diode, 1320nm, 800mW (1500mW QCW), 4µm emitter, C-mount package

 

Inquire

Get Quote
brass colored to-9 laser diode package, circular with 3 electrical pins TO9-184

Laser Diode, 1315nm, 2000mW (20000mW QCW), 95µm emitter, 9mm package, No Cap

 

Inquire

Get Quote
brass colored to-9 laser diode package, circular with 3 electrical pins TO9-185

Laser Diode, 1350nm, 2500mW (19000mW QCW), 95µm emitter, 9mm package, No Cap

 

Inquire

Get Quote
brass colored to-9 laser diode package, circular with 3 electrical pins TO9-248

Singlemode Laser Diode, 1310nm, 400mW, 4µm emitter, 9mm package, No Cap

 

Inquire

Get Quote

The SMX Series of US-made, high-power, thermally stable, and cost-effective InP laser diodes is available at 13XX, 14XX, 15XX, 16XX, and 19XX nm, perfect for medical, military, aerospace, LIDAR, free-space communications, and more! With a patented EPI structure, low-cost packaging, DFB & SOA configurations, ISO certified supply chain with full lifecycle traceability, focus on ease of integration, and custom design capabilities, this laser diode family is an excellent choice for reliable, high-power InP devices.

Benefits:

  • Cost-Effective: standard, low-cost packaging, ideal for high-volume professional and consumer needs
  • High Performance: high output power, high dynamic range, and high efficiency get you the performance you need, while conserving energy and extending lifetimes
  • Thermal Stability: excellent performance over temperature range and heat resistance for consistent and reliable operation with the highest powers, even in industrial and automotive applications
  • “Eye-Safe” Wavelengths: SWIR wavelengths beyond 1400nm are considered retina-safe, as they transmit well through air and glass, but are readily absorbed by water (cornea)
  • Patented EPI Structure: High-power with single and triple-junction at elevated temperatures, ensuring consistent performance and reliability
  • Technology Integration: Low-cost packages for optical, mechanical, and electrical components, simplifying assembly, reducing costs, and enhancing reliability
  • Qualified Supply Chain: Rapid scaling for timely volume production, with full lifecycle traceability and ISO certification at every level of the supply chain
  • Custom Design Capability: Tailored solutions, built to your specifications, when a standard solution may not suffice. Tell us what you need!

We deliver the highest available power at infrared wavelengths around 1470, 1550, and 1940 nm. When necessary, we will further optimize the design of our InP laser chips to meet our customers’ specific optical and electrical performance needs. We have several standard packages and configurations available, as well as customization options. If you do not see exactly what you are looking for, let us know! We may have a standard product that suits your needs. However, we have many options to tailor a solution that fits your specifications. Diodes, bars and packages are tested to meet customer and market performance demands.

If you have any questions or need more information, please contact us.

How can we help you?

Talk to one of our experienced product managers today!

Contact us

Component FAQs
Can I operate multiple laser diodes from the same power supply?

Can I operate multiple laser diodes from the same power supply?

The same power supply can drive multiple laser diodes if they are connected in series, but they must never be connected in parallel. When two diodes are connected in series, they will function properly as long as the compliance voltage is large enough to cover the voltage drop across each diode. For example, suppose you are trying to power two diode lasers, each with an operating voltage of 1.9 V, and connect the two in series. In that case, the pulsed or CW laser driver must have a total voltage capacity greater than 3.8 V. This configuration works because diodes share the same current when connected in series. In contrast, when two diodes are connected in parallel, the current is no longer shared between the two diodes. Get more details on the topic in this article: “Can I Operate Multiple Laser Diodes From the Same Power Supply?” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

Can laser diodes emit green, blue, or UV light?

Can laser diodes emit green, blue, or UV light?

The output wavelength of a semiconductor laser is based on the difference in energy between the valance and conduction bands of the material (bandgap energy). Since the energy of a photon is inversely proportional to its wavelength, this means that a larger bandgap energy will result in a shorter emission wavelength. Due to the relatively wide bandgap energy of 3.4 eV, gallium nitride (GaN) is ideal for the production of semiconductor optoelectronic devices, producing blue wavelength light without the need for nonlinear crystal harmonic generation. Since the mid-’90s, GaN substrates have been the common material utilized for blue LEDs. In recent years, GaN based laser technology has provided blue, green and UV laser diodes, now available in wavelengths from 375 nm to 521 nm, with output powers exceeding 100 watts. Read our article, titled “Gallium Nitride (GaN) Laser Diodes: Green, Blue, and UV Wavelengths” to learn more about GaN Based Laser Diodes, available through RPMC. Get more information from our Lasers 101, Blogs, Whitepapers, and FAQs pages in our Knowledge Center!

How long will a laser diode last?
How long will a laser diode last?

Honestly, it depends on several factors, and there is no simple chart to cover everything. Typical diode lifetimes are in the range of 25,000 to 50,000 hours. Though, there are lifetime ratings outside this range, depending on the configuration. Furthermore, there are a wide range of degradation sources that contribute to a shorter lifespan of laser diodes. These degradation sources include dislocations that affect the inner region, metal diffusion and alloy reactions that affect the electrode, solder instability (reaction and migration) that affect the bonding parts, separation of metals in the heatsink bond, and defects in buried heterostructure devices. Read more about diode lifetime and contributing factors in this article: “Understanding Laser Diode Lifetime.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What factors affect the lifetime of laser diodes?
What factors affect the lifetime of laser diodes?

There are a great many factors that can increase or decrease the lifetime of a laser diode. One of the main considerations is thermal management. Mounting or heatsinking of the package is of tremendous importance because operating temperature strongly influences lifetime and performance. Other factors to consider include electrostatic discharge (ESD), voltage and current spikes, back reflections, flammable materials, noxious substances, outgassing materials (even thermal compounds), electrical connections, soldering method and fumes, and environmental considerations including ambient temperature, and contamination from humidity and dust. Read more about these critical considerations and contributing factors in this article: “How to Improve Laser Diode Lifetime: Advice and Precautions on Mounting.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What is a laser diode?
What is a laser diode?

A Laser Diode or semiconductor laser is the simplest form of Solid-State Laser. Laser diodes are commonly referred to as edge emitting laser diodes because the laser light is emitted from the edge of the substrate. The light emitting region of the laser diode is commonly called the emitter. The emitter size and the number of emitters determine output power and beam quality of a laser diode. Electrically speaking, a laser diode is a PIN diode. The intrinsic (I) region is the active region of the laser diode. The N and P regions provide the active region with the carriers (electrons and holes). Initially, research on laser diodes was carried out using P-N diodes. However, all modern laser diodes utilize the double-hetero-structure implementation. This design confines the carriers and photons, allowing a maximization of recombination and light generation. If you want to start reading more about laser diodes, try this whitepaper “How to Improve Laser Diode Lifetime.” If you want to read more about the Laser Diode Types we offer, check out the Overview of Laser Diodes section on our Lasers 101 Page!

What is the difference between laser diodes and VCSELs?
What is the difference between laser diodes and VCSELs?

Laser Diodes and VCSELs are semiconductor lasers,  the simplest form of Solid State Lasers.  Laser diodes are commonly referred to as edge emitting laser diodes because the laser light is emitted from the edge of the substrate. The light emitting region of the laser diode is commonly called the emitter.  The emitter size and the quantity of emitters determine output power and beam quality of a laser diode. These Fabry Perot Diode Lasers with a single emission region (Emitter) are typically called laser diode chips, while a linear array of emitters is called laser diode bars. Laser diode bars typically use multimode emitters, the number of emitters per substrate can vary from 5 emitters to 100 emitters. VCSELs (Vertical Cavity Surface Emitting Laser) emit light perpendicular to the mounting surface as opposed to parallel like edge emitting laser diodes.  VCSELs offer a uniform spatial illumination in a circular illumination pattern with low speckle. If you want to read more about lasers in general, and help narrowing down the selection to find the right laser for you, check out our Knowledge Center for our Blogs, Whitepapers, and FAQ pages, as well as our Lasers 101 Page!VCSEL

What’s the difference between single transverse mode & single longitudinal mode?

What’s the difference between single transverse mode & single longitudinal mode?

Within the laser community, one of the most overused and often miscommunicated terms is the phrase “single mode.”  This is because a laser beam when traveling through air takes up a three-dimensional volume in space similar to that of a cylinder; and just as with a cylinder, a laser beam can be divided into independent coordinates each with their own mode structure.  For a cylinder we would call these the length and the cross-section, but as shown in the figure below for a laser beam, we define these as the transverse electromagnetic (TEM) plane and the longitudinal axis.   Both sets of modes are fundamental to the laser beam’s properties, since the TEM modes determine the spatial distribution of the laser beams intensity, and the longitudinal modes determine the spectral properties of the laser.  As a result, when a laser is described as being “single-mode” first you need to make sure that you truly understand which mode is being referred to.  Meaning that you must know if the laser is single transverse mode, single longitudinal mode, or both. Get all the information you need in this article: “What is Single Longitudinal Mode?” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!