Lasers that designate 1.5W of output power can have either CW (continuous wave) or pulsed output. CW Lasers are always defined in average output power. Pulsed Lasers with an output power defined in Watts or Milliwatts usually define the laser’s average power, not the peak power of the laser.
ALCOR is the most advanced femtosecond fiber laser emitting at 920 nm or 1064 nm, designed explicitly for multiphoton microscopy instrumentation and industrial OEM integration, working with 24/7 operation in an ultra-compact, robust and air-cooled format. Featuring the Alcor 920 4W, with the highest average power commercially available, as well as the XSight and FLeX Fiber external modules, allowing for fine & fast gating and power control, GDD precompensation, and fiber-coupling (FleX Fiber). 520 nm, 780 nm, and 1040 nm versions also available.
The HL Series of laser diodes are available in a wide range of wavelengths from violet to red and infrared in support of a broad range of applications. These applications include display, medical, biosciences, industrial tools (sensor, leveler), machine vision, scanners, printers and a myriad of other applications being developed in the industry.
The LDX Series of made-in-the-US, high-power, multimode laser diodes provide wavelengths from 400nm – 1900nm, a wide range of output powers and package types, as well as completely customized solutions. We have been offering these high-quality laser diodes for over 25 years. The performance, reliability, and lifetimes are time tested, and if for some reason there is an issue, we will make it right.
The PowerMir series is a high-power pulsed Quantum Cascade Laser based on proprietary technology which incorporates high-powered diodes (typically watt-level) emitting in the main transmission bands of the atmosphere (4.0µm, 4.6µm, 4.8µm, 9.x µm). The ITAR free MirSense technology exhibits outstanding performance in terms of power and wall-plug efficiency. This high-performance QCL laser assembly takes full advantage of MirSense’s state of the art technologies.
The R series of wavelength stabilized single mode and multimode laser diodes offer narrow wavelength spectrum in wavelengths from 633nm thru 1064nm. Package options range from components as basic as a TO-56 or 14-pin BF packaged diodes, to OEM modules including electronics, to UL/CE and IEC certified turn-key systems.
The RML series of laser diode modules are available with single mode fiber outputs with a set wavelength from 405nm – 2500nm. The compact RML series is available with up to 80mW of output power in a package measuring 15mm in diameter and 40mm in length (without connector) . As an option these modules are offered with a potentiometer for power adjustment, external TTL modulation up to 1MHz and analog modulation up to 100kHz.
The RWLD series of laser diodes are available in a wide range of wavelengths, power levels, and packages. The RWLD wavelength options span from 405nm to 1650nm, with output powers in the range of 10 mW to 300 mW, packaged in a TO-18 package with photodiode. Custom wavelengths, powers, and packages upon request.
The RWLP series of fiber coupled laser diodes are variable in both multimode and single mode configurations, with wavelengths from 405nm thru the IR. The highly reliable RWLP series is suitable for a variety of applications such as biological and analytical instrumentation.
The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.
SHIPS TODAY 
