500Hz Lasers 

On this page, we have a list of all of the 500Hz repetition (rep) rate lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

For pulsed lasers, unlike continuous-wave (CW) lasers, the output cannot be specified by their output power alone.  This is because the output power of a pulsed laser is determined by three different parameters; the laser’s pulse width, pulse energy, and pulse repetition rate.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
Bright Microlaser Microchip SB1 Laser SB1-236.5 Pulsed DPSS Lasers, Microchip Lasers 236.5 0.001 0.200, 2.0 2ns 500Hz, 5kHz Passive

Microchip Series

Bright Microlaser Microchip SB1 Laser

The Microchip Series, from BrightMicroLaser, are ultra-compact, passively q-switched, single longitudinal mode (SLM), narrow linewidth, DPSS lasers that feature pulse durations from 400 ps to 2 ns, energy levels up to 80 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.