30W Lasers

What are 30W Lasers?

30W Lasers include any particular laser that designates 30W of average output power, exhibiting either CW (continuous-wave) or pulsed output. CW Lasers are always defined in average output power. Pulsed Lasers with an output power defined in Watts or Milliwatts usually define the laser’s average power, not the peak power of the laser.

Our 100W Laser Products

RPMC Lasers has a selection of various lasers with 30W average output power. We categorize these options into different groups, such as single emitter laser diodes, multi-emitter laser diodes, laser diode arrays (bars), volume Bragg grating (VBG) laser diodes, CW fiber lasers, pulsed fiber lasers, pulsed DPSS lasers, and ultrafast lasers.

Our 100W lasers are available in many different configurations. For a couple examples of our varied configuration options, RPMC provides a 1035nm, ps pulsed DPSS laser, with 30W average output power (up to 40W available), up to 500 nJ pulse energy, <10ps pulse width, and up to 80MHz PRF, perfect for applications like fluorescence lifetime, non-linear spectroscopy, non-thermal ablation, and OPO pumping.

RPMC also offers a 793nm, fiber-coupled, multimode laser diode, with 30W CW power output, and back reflection protection, in an A5 package with 1m long, 105µm, 0.22NA fiber, with no connector, perfect for dental, night vision, and photodynamic therapy (PDT) applications.

Finally, we highlight a 30W, 980nm, fiber-coupled laser diode, in a 2-Pin Package with 105um multimode fiber and an FC/PC Connector.

These represent just a sample of what RPMC Lasers offers. Having many standard configuration options means that we likely have a standard laser configuration to fit your needs. However, if you do not see exactly what you are looking for on this page, do not hesitate to contact us! We can usually provide customization for most of our products, and can even offer a fully customized solution to fit your specific application needs.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Mode

Output

Linewidth

Series

Picture Part Number Type Wavelength (nm) Output power (W) Mode Output Linewidth Pulse energy (uJ) Pulse width Rep rate
HPFL GFL2 MFL TBS 1.5um CW/CW Modulated Fiber Lasers CW Fiber Lasers 1529-1610 2.0, 5.0, 30.0 Single-Mode Lasers SM Fiber, PM Fiber
Antares Antares Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers 1030, 1064 10.0, 20.0, 30.0 0.125, 0.250, 0.375, 0.500 10ps 80MHz
DIADEM Series Diadem IR Pulsed DPSS Lasers, Ultrafast Lasers 1030, 1064 10.0, 20.0, 30.0 10.0, 20.0, 30.0, 40.0 400fs, 10ps Single shot to 2MHz
Fiber Lasers Jenlas Fiber ns 25-105 Pulsed DPSS Lasers, Pulsed Fiber Lasers 1085 20.0, 30.0, 55.0, 100.0 700.0, 1000.0, 1100.0 125ns 30kHz to 80kHz, 50kHz to 100kHz, 100kHz to 200kHz
JOLD-FC-808 Array (Bar) 808 30.0, 45.0, 70.0, 75.0, 100.0, 120.0, 140.0, 210.0, 250.0, 400.0 Multimode MM Fiber
JOLD-FC-880 Array (Bar) 880 30.0, 45.0, 75.0, 100.0 Multimode MM Fiber
JOLD-FC-915 Array (Bar) 915 30.0, 45.0, 75.0, 100.0, 120.0, 140.0, 210.0, 250.0, 400.0 Multimode MM Fiber
JOLD-FC-940 Array (Bar) 940 30.0, 45.0, 70.0, 75.0, 100.0, 120.0, 140.0, 210.0, 250.0, 400.0 Multimode MM Fiber
JOLD-FC-976 Array (Bar) 976 30.0, 45.0, 75.0, 100.0, 120.0, 140.0, 210.0, 250.0, 400.0 Multimode MM Fiber
Multi-Emitter Laser Diodes RPK793M Multi-Emitter 793 8.0, 12.0, 16.0, 30.0, 50.0, 80.0, 90.0, 140.0, 180.0 Multimode MM Fiber
RPK808M Multi-Emitter 808 15.0, 25.0, 30.0, 60.0, 150.0 Multimode MM Fiber
K878BNXRN-30.00W: 878nm Fiber Coupled Diode Laser RPK878MS Multi-Emitter, Volume Bragg Grating (VBG) Laser Diodes 878 30.0, 65.0, 120.0 Multimode MM Fiber Narrow
RPK915M Multi-Emitter 915 30.0, 70.0, 160.0, 180.0, 300.0, 370.0 Multimode MM Fiber
Multi-Emitter Laser Diodes RPK940M Multi-Emitter 940 30.0, 70.0, 150.0, 200.0 Multimode MM Fiber
RPK976M Multi-Emitter 976 15.0, 20.0, 30.0, 70.0, 150.0, 200.0, 330.0, 540.0 Multimode MM Fiber
RWLP-915M: 915nm MultiMode Laser Diode RWLP-915M Single Emitter 915 2.0, 10.0, 20.0, 30.0, 55.0 Multimode MM Fiber
RWLP-940M: 940nm MultiMode Laser Diode RWLP-940M Single Emitter 940 0.200, 2.0, 10.0, 20.0, 30.0 Multimode MM Fiber
RWLP-980M: 980nm MultiMode Laser Diode RWLP-980M Single Emitter 980 0.100, 0.150, 2.0, 10.0, 20.0, 30.0, 55.0 Multimode MM Fiber
SOL-06: 1064nm compact nanosecond laser SOL-1064 Pulsed DPSS Lasers 1064 6.0, 10.0, 20.0, 30.0, 40.0 300.0, 450.0, 900.0, 1500.0, 2000.0 5ns - 35ns, 7ns - 35ns, 10ns - 40ns, 10ns - 50ns, 15ns - 60ns Single Shot to 100kHz

FL CW/CW Modulated Series

FL CW/CW Modulated SeriesRPMC offers a variety of standard and custom CW fiber laser options. Available in both OEM and Turnkey formats, our 1um, 1.5um and 2um fiber lasers are manufactured to Telcordia standards and can be modified to meet your applications requirements. With available powers up to 100W at 1um, 30W at 1.5um and 40W at 2um, our CW fiber lasers are suitable for a wide range of applications. Available options and configurations include narrow linewidth, single frequency outputs, C and L-band broadband sources, polarize maintaining fiber options, power tunability and high-speed triggering and modulation. Customized configurations are available upon request.

Antares Series

Antares

ANTARES is a picosecond, quasi-continuous wave laser with a high repetition rate up to 80 MHz and a narrow linewidth, in a very compact and robust format. This laser series offers average powers of 1 to 40W at 1030 nm or 1064 nm (upon request) and can be doubled or tripled in the harmonics to answer even the most challenging industrial and scientific applications. ANTARES is ideally suited for applications such as CARS and spectroscopy applications.

Diadem Series

DIADEM Series

DIADEM Series is a compact, air-cooled, high energy ultrafast laser for advanced micro-machining applications that require short femtosecond pulse widths. The Diadem is available with up to 40µJ of pulse energy, 30W of average power, and operation up to 1MHz (standard), with pulses below <400 fs and an M² < 1.2. This laser has been specifically designed for demanding medical implantable device and electronics manufacturing as well as high peak power optogenetics applications.

Jenlas Fiber ns

The Jenlas Fiber ns series of nanosecond pulsed fiber lasers at 1085nm are available with up to 105W, 190 to 250 nanoseconds pulse widths, and peak pulse powers of up to 8 kilowatts. for precise material processing and cutting applications.

JOLD-FC Series

The JOLD-FC Series of high quality high power fiber coupled laser diode bar products are offered in wavelengths from 780nm – 1064nm and 30W to 400W output power.

We offer standard wavelengths of 808 nm, 940 nm and 980 nm. The fiber core diameter of our diode lasers is 200 µm, 400 µm or 600 µm. On request, we will be happy to adapt the parameters to your individual requirements. You can also choose between pilot lasers, monitor diodes and integrated Peltier elements.

RPK Series

The RPK Series of multiple single emitter fiber coupled diode lasers are available in wavelengths from 405nm thru 1550nm with up to 300W output powers. These multi-emitter high power and high brightness diode lasers include options for aiming beam, photo detector, TEC, fiber detector, thermistor and a variety of package types.

RWLP Series

R3Z0-WSLP-905-050m-M-PD: 905nm Multimode Fiber Coupled Laser Diode

The RWLP series of fiber coupled laser diodes are variable in both multimode and single mode configurations, with wavelengths from 405nm thru the IR. The highly reliable RWLP series is suitable for a variety of applications such as biological and analytical instrumentation.

SOL Series

SOL-03-532: 532nm Nanosecond Laser

The SOL Series is the most compact Q-switched Diode Pumped Solid State laser available in the power range from 6W to 40W @ 1064nm. Sol versions @ 532nn are also available with the same footprint. These air-cooled DPSS lasers are offered in a rugged and lightweight Single Unit, designed to allow easy and reliable integration in micro-machining and marking applications. Compactness, insensitivity to environmental conditions and ease of handling guarantee superior operation flexibility and performance/cost ratio.