532nm Lasers Overview

Diode Pumped Solid State (DPSS) 532nm Lasers are by far the most common green laser available on the market today.  They are produced by frequency doubling Nd: YAG, Nd: YVO, or Nd: Glass solid-state lasers to provide 532 nm laser light.  DPSS 532 nm lasers are available with both pulsed and continuous wave (CW) configurations.  The Pulsed 532nm lasers are available in a wide range of pulse widths including femtosecond, picosecond, and nanosecond.  CW Laser modules are available in a range of output powers in either an OEM or plug and play versions.

Filters Reset

Type

Power Selection

Energy Selection

Mode

Output

Pulse Width Selection

Linewidth

Series

Manufacturer

Picture Part Number Type Output power (W) Mode Output Linewidth Pulse energy (uJ) Pulse width Rep rate
532L-1XB: 532nm Laser (DPSS; MATCHBOX 2) 532L-1XB CW DPSS Lasers 0.100, 0.160, 0.200 Single Mode Free Space, SM Fiber, PM Fiber, MM Fiber
532L-2XB: 532nm Laser (SLM DPSS; MATCHBOX 2) 532L-2XB CW DPSS Lasers 0.025, 0.040, 0.050 Single Mode Free Space, SM Fiber, PM Fiber, MM Fiber Narrow
532L-3XB: 532nm Laser (HP DPSS; MATCHBOX 2) 532L-3XB CW DPSS Lasers 0.350, 0.500 Multimode Free Space, MM Fiber
532L-4XB: 532nm Laser (HP DPSS; MATCHBOX 2) 532L-4XB CW DPSS Lasers 0.350, 0.500 Multimode Free Space, SM Fiber, PM Fiber, MM Fiber, SMA Port Narrow
AIRTRAC-6M: Low SWaP High Energy Laser AIRTRAC-6M Pulsed DPSS Lasers, Mil-Spec Lasers 1.2 40000.0 6ns 0-30Hz
R0Z2-Image-Compact-Efficient-UV-Laser AIRTRAC-C Pulsed DPSS Lasers 5.0, 10.0, 20.0 500.0, 1000.0, 2000.0 3ns 10kHz to 1MHz
ALCOR 5W: 1064nm Ultra-Compact Femtosecond Laser ALCOR 532 Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers 0.800, 2.0 0.025 100fs 80MHz (Optional: 40MHz)
DIADEM Series Diadem GR Pulsed DPSS Lasers, Ultrafast Lasers 10.0, 20.0, 30.0 10.0, 20.0, 30.0, 40.0 400fs, 10ps Single shot to 2MHz
UnikLasers Duetto 532 Laser Duetto-532 CW DPSS Lasers 0.500, 0.750, 1.0 Single Mode Free Space Narrow
JenLas-D2-X-Series-Thin-Disk-DPSS-Laser-Green-532nm JenLas D2.X CW DPSS Lasers 0.060, 2.0, 3.0, 5.0, 8.0 Multimode Free Space, MM Fiber
LCX-532 CW DPSS Lasers 0.050, 0.100, 0.200, 0.300 Single Mode Free Space, SM Fiber, PM Fiber, MM Fiber
LCX-532S LCX-532S CW DPSS Lasers 0.050, 0.100, 0.200, 0.300 Single Mode Free Space, SM Fiber, PM Fiber, MM Fiber Narrow
LPX-640 LPX-532 CW DPSS Lasers 0.500 Single Mode Free Space, SM Fiber, PM Fiber, MM Fiber
LPX-640 LPX-532S CW DPSS Lasers 0.500 Single Mode Free Space, SM Fiber, PM Fiber, MM Fiber Narrow
MicroMake: Micromachining Laser System MicroMake 532 Micromachining System 10000.0, 35000.0 1kHz, 10kHz to 100kHz
Onda 532nm: 532nm High Energy Laser Onda 532nm Pulsed DPSS Lasers 5.0, 10.0 400.0, 800.0 2ns to 14ns Single Shot to 100kHz
Quantas-Q-SPARK-532: High energy, compact, nanosecond, DPSS laser Quantas-Q-SPARK-532 Pulsed DPSS Lasers 0.010 2500.0 2ns 20Hz
Quantas-Q1-532: High energy, compact, nanosecond, DPSS laser Quantas-Q1-532 Pulsed DPSS Lasers 0.050, 0.060, 0.080, 0.100, 0.125, 0.150, 0.170, 0.250 1200.0, 2500.0, 4000.0, 5000.0, 7500.0, 10000.0, 12500.0, 17000.0 10ns Single Shot to 10Hz, Single Shot to 20Hz, Single Shot to 50Hz
Quantas Q2 QLI Quantas-Q2-532 Pulsed DPSS Lasers 0.500, 0.750, 0.800, 1.0, 2.0 500.0, 5000.0, 25000.0, 30000.0, 35000.0, 40000.0 5ns, 6ns, 7ns, 8ns, 10ns 10Hz, 20Hz, 33.3Hz, 50Hz, 100Hz, 200Hz
Quantas-Q2HE-532: High energy, compact, nanosecond, DPSS laser Quantas-Q2HE-532 Pulsed DPSS Lasers 0.500, 0.800, 1.0, 1.75, 2.0 20000.0, 35000.0, 40000.0, 50000.0 6ns 10Hz, 20Hz, 50Hz, 100Hz
RXXXXP-EC-AB-XXX-WD-DW RXXXXP-EC-AB-XXX-WD-DW Raman Probe 0.350
Bright Microlaser Microchip SB1 Laser SB1-532 Pulsed DPSS Lasers, Microchip Lasers 0.004, 0.006, 0.010, 0.017, 0.020, 0.030, 0.040, 0.075, 0.100 0.300, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 400ps, 1.3ns 10Hz, 100Hz, 200Hz, 1kHz, 5kHz, 10kHz, 15kHz, 55kHz, 100kHz
Sirius-532: Picosecond DPSS lasers Sirius GR Pulsed DPSS Lasers, Ultrafast Lasers 2.0 32.0 10ps Single shot to 1MHz
SOL-03-532: 532nm Nanosecond Laser SOL-532 Pulsed DPSS Lasers 3.0, 5.0, 10.0, 20.0, 35.0 200.0, 400.0, 650.0, 1200.0 10ns to 50ns, 10ns to 60ns, 15ns to 60ns Single Shot to 100kHz
Vento-532-15: 532nm Picosecond DPSS Laser Vento-532 Pulsed DPSS Lasers 7.0, 15.0, 50.0 150.0, 400.0, 1000.0 400ps to 1.5ns 40kHz to 200kHz
Wedge-B-532 Wedge-HB/XB 532 Pulsed DPSS Lasers 2.0 1000.0, 2000.0 1.5ns Single shot to 1kHz, Single shot to 2kHz
Wedge-F-532 Wedge-HF/XF 532 Pulsed DPSS Lasers 0.500, 1.5, 2.0, 4.0 30.0, 40.0, 80.0, 120.0 400ps to 1ns, 500ps to 1.5ns, 750ps to 2ns, 750ps to 2.5ns 10kHz to 100kHz, Single shot to 10kHz

Matchbox Series

R1Z4-Matchbox Laser

The Matchbox series of compact laser diode and DPSS laser modules are available in wavelengths from 405nm thru 1064nm. Options include collimated beam or fiber coupled output, and single mode and multimode versions.

Airtrac Series

AIRTRAC-6M: Low SWaP High Energy Laser

The AIRTRAC series, from Areté’s Associates, is a ruggedized, high-shock, ultra-compact, actively q-switched, low-SWaP, DPSS laser, available with >90 mJ of pulse energy. Fully compliant NATO STANAG 3733 configurations for laser designation are available in a complete system weighing less than 1 lb. The athermal design of the AIRTRAC ensures high laser pulse energy, stable performance over the full temperature range with low beam divergence.

Alcor Series

Alcor

ALCOR is the most advanced femtosecond fiber laser emitting at 920 nm or 1064 nm specifically designed for multiphoton microscopy instrumentation and industrial OEM integration, working with 24/7 operations, in an ultra-compact, robust and air-cooled format. Featuring the Alcor 920 4W, with the highest average power commercially available, as well as the XSight and FLeXSight external modules, allowing for fine and fast gating and power control, and GDD precompensation.

Diadem Series

DIADEM Series

DIADEM Series is a compact, air-cooled, high energy ultrafast laser for advanced micro-machining applications that require short femtosecond pulse widths. The Diadem is available with up to 40µJ of pulse energy, 30W of average power, and operation up to 1MHz (standard), with pulses below <400 fs and an M² < 1.2. This laser has been specifically designed for demanding medical implantable device and electronics manufacturing as well as high peak power optogenetics applications.

Unik Series

UnikLaser Solo-780.24 QT

The Unik series of CW single-frequency lasers, featuring the Solo and Duetto configurations, are available at a variety of wavelengths with high average powers, making them well suited for a variety of highly specialized scientific and industrial applications. BRaMMS Technology® enables superior performance, high output powers, and outstanding beam properties in an overall compact footprint. The Unik Lasers Solo and Duetto series are utilized in a range of applications including holography, metrology, spectroscopy, and quantum technology.

JenLas D2

The JenLas D2 series of CW disk lasers with a wavelength of 532nm are available with up to 8W output power. These Nd:YVO4 or Yb:KYW solid state lasers are ideal for industrial micro material processing and medical treatments

LaserBoxx Low Noise Series

The LaserBoxx low noise Series is a CW diode laser module in a variety of diode wavelengths from 375 to 785nm, with output powers up to 350mW. This compact, self-contained laser module is available in turn-key or OEM versions and utilizes a proprietary alignment-free, monolithic resonator, and comes standard with a graphic user interface with remote diagnostics via USB, RS232, or direct I/O interface.

LaserBoxx SLM Series

The LaserBoxx-SLM Series is a single longitudinal mode (SLM) CW diode laser module available in wavelengths at 633nm, 785nm, and 830nm delivering ultra-narrow linewidths thanks to its excellent temperature stability and low noise current. The Oxxius proprietary, embedded firmware locks the laser on the same mode at each startup. This compact, self-contained laser module is available in turn-key or OEM versions and utilizes a proprietary alignment-free, monolithic resonator, and comes standard with a graphic user interface with remote diagnostics via USB, RS232, or direct I/O interface.

MicroMake Series

MicroMake: Micromachining Laser SystemMicroMake Series from Bright System is an integrated compact laser micromachining system for high precision and resolution applications such as ablation and cutting of programmable arbitrary shapes. The sub-nanosecond MicroMake series is a flexible platform capable of >35kW of peak power and processing speeds up to 40mm/second. The system includes all the needed devices for direct laser micro-processing in a single monolithic air-cooled configuration. Live microscope imaging of the sample is offered during all process phases for alignment and immediate quality check. All these features perfectly suit a large variety of materials utilized in the fields of microelectronic circuits, displays fabrication and correction, biomedical device machining and optical substrates microprocessing.

Onda Series

Onda 532nm: 532nm High Energy Laser

The Onda Series is a DPSS nanosecond OEM laser platform aimed at high-end applications requiring both excellent beam quality and high peak power in materials such as metals, glass, plastics, and various delicate and hard materials. Developed initially as a high-energy seeder for advanced MOPA laser systems, the Onda is now available as a standalone device operating at the wavelengths of 266, 355, 532 and 1064nm. The compactness and ease of use allow for superior operation flexibility and performance / cost ratio.

Q-Spark

Quantas-Q-SPARK-266: High energy, compact, nanosecond, DPSS laser

The Q-SPARK series, from Quantum Light Instruments Ltd., features a short <1.5 ns pulse with pulse energies up to 10 mJ. Due to the short cavity design, pulse durations of <800ps are achievable with pulse energies up to 5mJ. The innovative water-free laser crystal end-pumping technology produces a Gaussian-like, low divergence, high peak power laser beam in compact, air-cooled package.

Q1 Series

Quantas-Q1-211: High energy, compact, nanosecond, DPSS laser

The Q1 series is a compact, energy-efficient, diode pumped, air-cooled, Q-switched laser available at 1064 and 1053nm with up to 45 mJ of pulse energy and rep rates up to 50Hz. The high peak powers and low divergence of the Q1 series enable efficient harmonic conversion through the 5th harmonic (213 or 211nm). The innovative laser design has resulted in a user-friendly, turnkey system that requires little maintenance.

Q2 Series

Quantas Q2 QLI

The Q2 series is a versatile, diode pumped, air-cooled, Q-switched laser capable of achieving up to 80mJ of pulse energy with an operational rep rate up to 100Hz. Available at the fundamental wavelengths of 1064 and 1053nm, the innovative water-free laser crystal end-pumping technology produces Gaussian-like, low divergence laser beams with high peak powers, enabling efficient harmonics conversion through the 5th harmonic.

Q2HE Series

Quantas-Q2HE-211: High energy, compact, nanosecond, DPSS laser

The Q2HE series, from Quantum Light Instruments Ltd., features an innovative water-free laser crystal cooling technology that enables generation of high quality laser beams with up to 100 mJ pulse energy and/or up to 4 W of average output power. Featuring a pulse duration of less than 7 ns and a low beam divergence, the Q2HE is capable of achieving efficient fundamental wavelength conversion through the 5th harmonics of 213/211 nm.

Microchip Series

Bright Microlaser Microchip SB1 Laser

The Microchip Series, from BrightMicroLaser, are ultra-compact, passively q-switched, single longitudinal mode (SLM), narrow linewidth, DPSS lasers that feature pulse durations from 350 ps to 3 ns, energy levels up to 100 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.

Sirius Series

Sirius-532: Picosecond DPSS lasers

SIRIUS is a very compact, high energy hybrid ultrafast laser for advanced micro-machining applications and supercontinuum pumping, offering over 120µJ and > 5 W, with pulses below 10 ps from single shot to 1MHz and an M² of < 1.2. This laser series specifically designed to allow for ergonomic and user-friendly operation. SIRIUS is ideally suited for selective ablation, electronics, and photonic applications.

SOL Series

SOL-03-532: 532nm Nanosecond Laser

The SOL Series is the most compact Q-switched Diode Pumped Solid State laser available in the power range from 6W to 40W @ 1064nm. Sol versions @ 532nn are also available with the same footprint. These air-cooled DPSS lasers are offered in a rugged and lightweight Single Unit, designed to allow easy and reliable integration in micro-machining and marking applications. Compactness, insensitivity to environmental conditions and ease of handling guarantee superior operation flexibility and performance/cost ratio.

Vento Series

Vento-532-7: 532nm Picosecond DPSS Laser

The Vento Series of sub-ns DPSS active Q-Switched lasers produce pulses in the hundreds of ps range with average power up to 50 W @ 532 nm and up to 100 W @ 1064 nm. Ideal for micromachining, fine cutting and precision LIDAR, all the models are enclosed in an extremely compact and ruggedized single unit with both air-cooled and water-cooled options available.

Wedge Series

Wedge-XF-1064: 1064nm Picosecond Laser

The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.