5Hz Lasers 

On this page, we have a list of all of the 5Hz repetition (rep) rate lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

For pulsed lasers, unlike continuous-wave (CW) lasers, the output cannot be specified by their output power alone.  This is because the output power of a pulsed laser is determined by three different parameters; the laser’s pulse width, pulse energy, and pulse repetition rate.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset


Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection


Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
OT-XX Pulsed DPSS Lasers, Mil-Spec Lasers 1540 0.001, 0.0012, 0.002, 0.0022, 0.0024, 0.0025, 0.0045, 0.0095, 0.020, 0.030, 0.075, 0.100, 0.200 900.0, 1000.0, 1200.0, 1500.0, 1900.0, 2000.0, 2100.0, 2200.0, 2400.0, 2500.0, 10000.0 9ns, 10ns, 12ns, 15ns, 20ns, 24ns, 35ns, 40ns 1Hz, 5Hz, 10Hz, 20Hz, 30Hz Active, Passive

OT Series

The OT series of Erbium Glass lasers are ultra-compact, high energy q-switched, solid-state lasers that are well suited for rugged, field applications such as active night vision and rangefinding. These air-cooled lasers are available in both lamp-pumped and diode-pumped configurations, with passive and active Q-switching options. With over 10,000 units in the field, the OT series is a proven technology operating in some of the more challenging laser environments.