375nJ Lasers

Unlike continuous wave lasers, the output of these 375nJ pulsed lasers cannot be specified by their output power alone. This is because the output power of a pulsed laser is determined by three different parameters, the laser’s pulse width, pulse energy, and pulse repetition rate.

On this page, we have a list of all of the 375nJ lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset


Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection



Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
Antares Antares Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers 1030, 1064 10.0, 20.0, 30.0 0.125, 0.250, 0.375, 0.500 10ps 80MHz Active

Antares Series


ANTARES is a picosecond, quasi-continuous wave laser with a high repetition rate up to 80 MHz and a narrow linewidth, in a very compact and robust format. This laser series offers average powers of 1 to 40W at 1030 nm or 1064 nm (upon request) and can be doubled or tripled in the harmonics to answer even the most challenging industrial and scientific applications. ANTARES is ideally suited for applications such as CARS and spectroscopy applications.