1kHz to 10kHz Lasers

On this page, we have a list of all of the 1kHz to 10kHz repetition (rep) rate lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

For pulsed lasers, unlike continuous-wave (CW) lasers, the output cannot be specified by their output power alone.  This is because the output power of a pulsed laser is determined by three different parameters; the laser’s pulse width, pulse energy, and pulse repetition rate.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate
sleek, modern, light grey colored OPO & DPSS laser housing Q-TUNE-HR Pulsed DPSS Lasers, Tunable Lasers Tunable 5.0 50.0, 100.0 5ns - 7ns 1kHz to 10kHz, 10kHz to 100kHz
sleek, modern looking pulsed OEM DPSS laser housing with adjustable feet VaryDisk E150 Pulsed DPSS Lasers 1030 150.0 150000.0 2ps - 1ns 1kHz to 10kHz

Q-TUNE-HR Series

sleek, modern, light grey colored OPO & DPSS laser housingThe Q-TUNE-HR series is a high repetition rate OPO producing a tunable wavelength range from ≈ 750 – 1800 nm and up to 100 kHz pulse repetition rate, the perfect coherent light source for micromachining, Raman spectroscopy, microscopy, and remote sensing applications. Q-TUNE-HR requires an external pump source with > 350 μJ pulse energy and 5 – 7 ns FWHM pulse duration @ 532 nm for operation: pulse repetition rate can be in 10 – 100 kHz range and acceptable pump power in the 3.5 – 30 W range. By default OPO is optimized to produce maximum output in 1200 – 1800 nm range (optional: 750 – 950 nm). In addition to the tunable range, the pump laser wavelength is accessible through a convenient bypass port.

VaryDisk Series

The VaryDisk Series is a versatile family of thin-disk laser systems that provide high pulse energies at high average powers and are suitable for lab or industrial use. These thin-disk regenerative amplifiers offer a range of output specifications to fit various application needs. The base configurations provide 25 W average power with 2.5 mJ pulse energy @ 343 nm (THG), 50 W and 5 mJ @ 515 nm (SHG), and 100W and 100 mJ @ 1030 nm.