22mJ Lasers

Unlike continuous wave lasers, the output of these 22mJ pulsed lasers cannot be specified by their output power alone. This is because the output power of a pulsed laser is determined by three different parameters, the laser’s pulse width, pulse energy, and pulse repetition rate.

On this page, we have a list of all of the 22mJ lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset


Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection



Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
Quantas-Q1-527: High energy, compact, nanosecond, DPSS laser Quantas-Q1-527 Pulsed DPSS Lasers 527 0.050, 0.060, 0.080, 0.100, 0.125, 0.150, 0.220, 0.250 1200.0, 2500.0, 4000.0, 5000.0, 7500.0, 10000.0, 12500.0, 22000.0 10ns Single Shot to 10Hz, Single Shot to 20Hz, Single Shot to 50Hz Active

Q1 Series

Quantas-Q1-211: High energy, compact, nanosecond, DPSS laser

The Q1 series is a compact, energy-efficient, diode pumped, air-cooled, Q-switched laser available at 1064 and 1053nm with up to 45 mJ of pulse energy and rep rates up to 50Hz. The high peak powers and low divergence of the Q1 series enable efficient harmonic conversion through the 5th harmonic (213 or 211nm). The innovative laser design has resulted in a user-friendly, turnkey system that requires little maintenance.