1-9uJ

1-9uJ Pulse Energy Lasers Overview

Unlike continuous-wave lasers, the output of pulsed lasers cannot be specified by their output power alone.  This is because the output power of a pulsed laser is determined by three different parameters the laser’s pulse width, pulse energy, and pulse repetition rate.

Contact us today to let one of our knowledgeable Product Managers assist you!

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Manufacturer

13 results found
Picture Part Number Type Wavelength (nm) Output Power (W) Pulse Energy (uJ) Pulse Width Rep Rate
CPFL CPFL-1.5t Pulsed Fiber Lasers 1550 0.150 5.0 400ps, 50ns 5kHz, 1MHz
FP3-1064-2-100: 1064nm microchip laser FP3-1064-2-100 Microchip Lasers 1064 0.200 2.0 470ps 100kHz
FP3-1064-2-55: 1064nm microchip laser FP3-1064-2-55 Microchip Lasers 1064 0.110 2.0 470ps 55kHz
FP3-473-1-10: 473nm Microchip Laser FP3-473-1-10 Microchip Lasers 473 0.010 1.0 2ns 10kHz
FP3-473-3-5: 473nm microchip laser FP3-473-3-5 Microchip Lasers 473 0.015 3.0 2.5ns 5kHz
FP3-473-9-0.1: 473nm microchip laser FP3-473-9-0.1 Microchip Lasers 473 0.009 9.0 2.5ns 100Hz
FP3-532-7-15: 532nm microchip laser FP3-532-7-15 Microchip Lasers 532 0.105 7.0 1.3ns 15kHz
FP3-946-7-10: 946nm Microchip Laser FP3-946-7-10 Microchip Lasers 946 0.105 7.0 2ns 10kHz
P4-236.5-2-0.5: 236nm Microchip Laser P4-236.5-2-0.5 Microchip Lasers 236.5 0.001 2.0 2ns 500Hz
P4-266-1-5: 266nm Microchip Laser P4-266-1-5 Microchip Lasers 266 0.0005 1.0 1.3ns 1kHz

CPFL Series

CPFL Series by BKtelThe CPFL series is a Telcom grade compact 1.5um pulsed laser series available with up to 1W of average power and nanosecond to sub-nanosecond pulses. This telecom grade, fiber lasers enables a variety of applications including long range LIDAR and other “eye-safe” laser operations. The CPFL Laser is flexible format available at various pulse widths, repetition rates and center wavelengths to meet a variety of application requirements

Microchip Series

Microchip Series by BrightMicrolaser

The Microchip Series, available in the FP3 and P4 packages from BrightMicroLaser, are ultra-compact, passively q-switched DPSS lasers that feature pulse durations from 350 ps to 3 ns, energy levels up to 100 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.

Wedge Series

Wedge Laser Series by Bright Solutions

The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.