>300 Picosecond

>300 Picosecond Lasers Overview

>300 Picosecond lasers are one of the most diverse categories of pulsed lasers available on the market today since picosecond pulses (10-12s) can be generated by q-switching, gain switching, and mode locking.  >300 Picosecond pulses can be produced from diode-pumped solid-state (DPSS) lasers, fiber lasers, and microchip lasers allowing for an extensive wavelength range from the ultraviolet through the infrared region.  Additionally, this broad range of lasers enables pulse energies in the nJ, uJ, and mJ levels with pulse repetition rates varying from Hz to MHz.  The high peak power and short pulse widths of picosecond lasers are ideal for a wide range of applications especially for material processing and machining applications such as laser texturing, trimming, and drilling.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Manufacturer

Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
CPFL-1.5a: 1.5µm OEM Fiber Laser CPFL-1.5a Pulsed Fiber Lasers 1550 1.0 80.0 400ps, 50ns 10kHz, 1MHz
CPFL-1.5xx OEM CPFL-1.5at Pulsed Fiber Lasers 1550 1.0 80.0 200ps, 5ns 10kHz, 1MHz
CPFL CPFL-1.5t Pulsed Fiber Lasers 1550 0.150 5.0 400ps, 50ns 5kHz, 1MHz
CFPL2 OEM Fiber Laser CPFL2 Pulsed Fiber Lasers 1550 1.0 25.0 200ps, 5ns 1MHz
Pulsed Fiber Laser HFL-1 Pulsed Fiber Lasers 1030, 1053, 1064 5.0 150.0 400ps, 50ns 10kHz, 100kHz, 1MHz Active
HFL: 1550nm High Power Pulsed Fiber Laser HFL Pulsed Fiber Lasers 1550 5.0 50.0 400ps, 50ns 10kHz, 1MHz
neoVAN neoVAN DPSS Amplifiers 1064 50.0 5000.0 400ps, CW
Vento-1064-100: 1064nm Picosecond DPSS Laser Vento-1064-100 Pulsed DPSS Lasers 1064 100.0 2000.0 450ps to 1.5ns 40kHz to 200kHz Active
Vento-1064-15: 1064nm Picosecond DPSS Laser Vento-1064-15 Pulsed DPSS Lasers 1064 15.0 300.0 450ps to 1.5ns 40kHz to 200kHz Active
Vento-1064-40: 1064nm Picosecond DPSS Laser Vento-1064-40 Pulsed DPSS Lasers 1064 40.0 800.0 450ps to 1.5ns 40kHz to 200kHz Active
Vento-532-15: 532nm Picosecond DPSS Laser Vento-532-15 Pulsed DPSS Lasers 532 15.0 400.0 400ps to 1.5ns 40kHz to 200kHz Active
Vento Vento-532-50 Pulsed DPSS Lasers 532 50.0 1000.0 400ps to 1.5ns 40kHz to 200kHz Active
Vento-532-7: 532nm Picosecond DPSS Laser Vento-532-7 Pulsed DPSS Lasers 532 7.0 150.0 400ps to 1.5ns 40kHz to 200kHz Active
Wedge-HF-532-Plus: 532nm Picosecond Laser Wedge-HF-532-Plus Pulsed DPSS Lasers 532 4.0 120.0 750ps to 2ns 10kHz to 100kHz Active
Wedge-HF-532: 532nm Picosecond Laser Wedge-HF-532 Pulsed DPSS Lasers 532 1.5 80.0 750ps to 2.5ns 10kHz to 100kHz Active
Wedge-XF-1064: 1064nm compact picosecond laser Wedge-XF-1064-Plus Pulsed DPSS Lasers 1064 4.0 70.0 400ps to 1.5ns 50kHz to 200kHz Active
Wedge-XF-1064: 1064nm Picosecond Laser Wedge-XF-1064 Pulsed DPSS Lasers 1064 1.5 70.0 400ps to 1.5ns 10kHz to 100kHz Active
Wedge-XF-266: 266nm compact picosecond laser Wedge-XF-266 Pulsed DPSS Lasers 266 0.050 5.0 500ps to 700ps 10kHz to 50kHz Active
Wedge-XF-532: 532nm compact picosecond laser Wedge-XF-532-Plus Pulsed DPSS Lasers 532 2.0 40.0 500ps to 1.5ns Single shot to 10kHz Active
Wedge-XF-532: 532nm Picosecond Laser Wedge-XF-532 Pulsed DPSS Lasers 532 0.500 30.0 400ps to 1ns 10kHz to 100kHz Active

CPFL Series

CPFL-1.5a: 1.5µm OEM Fiber LaserThe CPFL series is a Telcom grade compact 1.5um pulsed laser series available with up to 1W of average power and nanosecond to sub-nanosecond pulses. This telecom grade, fiber lasers enables a variety of applications including long range LIDAR and other “eye-safe” laser operations. The CPFL Laser is flexible format available at various pulse widths, repetition rates and center wavelengths to meet a variety of application requirements

HFL Series

HFL: 1550nm High Power Pulsed Fiber Laser

HFL series is a high-energy, q-switched, wavelength stabilized, OEM fiber laser from Bktel, perfect for LiDAR and 3D scanning applications. This ultra-compact series offers high pulse repetition rates up to several MHz, 5W average power output (25W peak), up to 150µJ of pulse energy, pulse widths between 0.4 and 10ns, and delivers a perfect TEM00 output beam with fiber and collimating lens options.

Vento Series

Vento-532-7: 532nm Picosecond DPSS Laser

The Vento Series of sub-ns DPSS active Q-Switched lasers produce pulses in the hundreds of ps range with average power up to 50 W @ 532 nm and up to 100 W @ 1064 nm. Ideal for micromachining, fine cutting and precision LIDAR, all the models are enclosed in an extremely compact and ruggedized single unit with both air-cooled and water-cooled options available.

Wedge Series

Wedge-XF-1064: 1064nm Picosecond Laser

The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.