8mW lasers include any laser that designates 8mW of output power (average power) can have either CW (continuous wave) or pulsed output. CW Lasers are always defined in average output power. Pulsed Lasers with an output power defined in Watts or Milliwatts usually define the laser’s average power, not the peak power of the laser.
We provide a selection of 8mW lasers, available in various configurations including single emitter laser diodes, distributed feedback (DFB) laser diodes, laser diode modules, VCSELs (vertical-cavity surface-emitting laser diodes), SLEDs or SLDs (superluminescent laser diodes), pulsed DPSS lasers, and microchip lasers.
|Picture||Part Number||Type||Wavelength (nm)||Output power (W)||Mode||Output||Linewidth||Pulse energy (uJ)||Pulse width||Rep rate|
|LTC-ISB-G1||LD Module, Superluminescent||1300, 1370, 1430, 1480, 1550, 1680, 1700||0.006, 0.008, 0.010, 0.012, 0.013, 0.015, 0.030||Single-Mode Lasers||Free Space, SM Fiber, PM Fiber||Broadband|
|LTC-OSE-G1||Superluminescent||1300, 1340, 1390, 1430, 1480, 1550, 1615, 1680||0.006, 0.008, 0.010, 0.012, 0.013, 0.015, 0.030||Single-Mode Lasers||Free Space, SM Fiber, PM Fiber||Broadband|
|Quantas-Q1-211||Pulsed DPSS Lasers||211||0.005, 0.008, 0.010, 0.014, 0.024, 0.025||100.0, 200.0, 400.0, 500.0, 700.0, 1000.0, 1200.0, 2500.0||10ns||Single Shot to 10Hz, Single Shot to 20Hz, Single Shot to 50Hz|
|Quantas-Q1-213||Pulsed DPSS Lasers||213||0.005, 0.008, 0.010, 0.014, 0.020, 0.024, 0.025||100.0, 200.0, 400.0, 500.0, 700.0, 1000.0, 1200.0, 2000.0||10ns||Single Shot to 10Hz, Single Shot to 20Hz, Single Shot to 50Hz|
|REP1380-1400||LD Module, Single Emitter, Distributed Feedback DFB Lasers||1380-1400||0.008||Single-Mode Lasers||Free Space, SM Fiber, PM Fiber||Narrow|
|REP1500-1560||LD Module, Single Emitter, Distributed Feedback DFB Lasers||1500-1560||0.005, 0.008, 0.016, 0.020, 0.022, 0.050||Single-Mode Lasers||Free Space, SM Fiber, PM Fiber||Narrow|
|RWLP-1590S||Single Emitter, Distributed Feedback DFB Lasers||1590||0.002, 0.005, 0.008||Single-Mode Lasers||SM Fiber, PM Fiber||Narrow|
|RWLP-1610S||Single Emitter, Distributed Feedback DFB Lasers||1610||0.002, 0.005, 0.008||Single-Mode Lasers||SM Fiber, PM Fiber||Narrow|
|RWLP-1625S||Single Emitter, Distributed Feedback DFB Lasers||1625||0.002, 0.005, 0.008||Single-Mode Lasers||SM Fiber, PM Fiber||Narrow|
|SB1-1064||Pulsed DPSS Lasers, Microchip Lasers||1064||0.008, 0.012, 0.040, 0.110, 0.150, 0.200, 0.225, 0.400||2.0, 15.0, 20.0, 30.0, 40.0, 60.0, 80.0||400ps, 1.3ns||100Hz, 200Hz, 1kHz, 5kHz, 10kHz, 15kHz, 55kHz, 100kHz|
|VD-0850-CW||VCSELs||850||0.008, 0.200, 0.400, 0.700, 1.0, 2.0, 4.0, 8.0||Single-Mode Lasers||Free Space|
|VD-0940-CW||VCSELs||940||0.008, 0.020, 0.060, 0.070, 0.140, 0.150, 0.160, 0.200, 0.250, 0.500, 2.0, 4.0||Single-Mode Lasers||Free Space|
The (Integrated Spectral Bench) product is a compact Superluminescent Diode (SLED) solution that employs Luxmux’s high-performance Optical Spectral Engine (OSE) module. The ISB is a broadband light source that operates in the near infrared range. It is a turn-key product that can easily be integrated into existing devices that require light power.
The LTC-OSE series from Luxmux, trade named BeST-SLED®, can be configured with up to 6 super luminescent diodes and driver circuitry, into a single 32 pin butterfly package. This reliable, cost-effective, rugged broadband light source produces overlapping spectral coverage from 1230nm to 1730nm, generating up to 19 spectral combinations, and average powers up to 50mW. The LCT-OSE series is suitable for direct integration into existing OEM products for Optical Coherence Tomography, Optical Sensing, White Light Interferometry and others.
The Q1 series is a compact, energy-efficient, diode pumped, air-cooled, Q-switched laser available at 1064 and 1053nm with up to 45 mJ of pulse energy and rep rates up to 50Hz. The high peak powers and low divergence of the Q1 series enable efficient harmonic conversion through the 5th harmonic (213 or 211nm). The innovative laser design has resulted in a user-friendly, turnkey system that requires little maintenance.
The REP series includes tunable single-frequency (DFB-like) diode lasers and Fabry-Perot laser diodes in wavelengths from 1270nm thru 2350nm for communications, sensing and measurement applications.
The REP Series is specifically engineered for applications such as gas sensing, LIDAR, metrology, and optical communications. Multiple packaging options are available including the Fiber coupled 14-pin butterfly, TO39 (w/TEC), and TO56.
For a complete module incorporating the fiber coupled butterfly package with an integrated current driver and TEC controller, designed for ease of operation, it is the ideal platform for high stability gas detection or remote sensing. See the DX1 Series.
The RWLP series of fiber coupled laser diodes are variable in both multimode and single mode configurations, with wavelengths from 405nm thru the IR. The highly reliable RWLP series is suitable for a variety of applications such as biological and analytical instrumentation.
The Microchip Series, from BrightMicroLaser, are ultra-compact, passively q-switched, single longitudinal mode (SLM), narrow linewidth, DPSS lasers that feature pulse durations from 400 ps to 2 ns, energy levels up to 80 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.
The VD Series of Vertical Cavity, Surface Emitting Laser (VCSEL) emitters, and arrays are available in a wide range of output powers in wavelengths of 650 nm, 808 nm, 850 nm, and 940 nm. Standard options include VCSEL, VCSEL w/ Diffusor, VCSEL & PD w/ Diffusor, and pulsed VCSELs. These low-cost lasers are ideal for a wide range of consumer products.