SHIPS TODAY
0
Cart
Solid State Lasers and Laser Diodes from RPMC Lasers Inc » Products » 30MHz

30MHz Lasers 

On this page, we have a list of all of the 30MHz repetition (rep) rate lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

For pulsed lasers, unlike continuous-wave (CW) lasers, the output cannot be specified by their output power alone.  This is because the output power of a pulsed laser is determined by three different parameters; the laser’s pulse width, pulse energy, and pulse repetition rate.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Talk to a Product Manager

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

more more
Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
Altair: Femtosecond Laser Altair Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers 1040 10.0, 20.0 0.125, 0.250, 1.0 150fs, 250fs 30MHz, 80MHz, Single shot to 40MHz Active
more more

Altair Series

Altair: Femtosecond Laser

The ALTAIR series produces high average powers up to 20W and ultrashort femtosecond pulses of <150 fs (<250 fs for VERSA configuration) at a high repetition rate of 80 MHz (others available). Ideal for bioimaging/biophotonics applications such as multiphoton microscopy, the ALTAIR provides high stability and excellent beam quality due to its mode-locked fiber design. It offers a range of options such as GDD pre-compensation, custom wavelengths, harmonics, repetition rates, and more. With a simplified fiber design that requires little to no maintenance compared to DPSS and Ti:Sapphire counterparts, the ALTAIR is the preferred solution for both OEM and researchers in the microscopy and life sciences fields.