200Hz Lasers 

On this page, we have a list of all of the 200Hz repetition (rep) rate lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

For pulsed lasers, unlike continuous-wave (CW) lasers, the output cannot be specified by their output power alone.  This is because the output power of a pulsed laser is determined by three different parameters; the laser’s pulse width, pulse energy, and pulse repetition rate.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Q2 Series

Quantas Q2 QLI

The Q2 series is a versatile, diode pumped, air-cooled, Q-switched laser capable of achieving up to 80mJ of pulse energy with an operational rep rate up to 100Hz. Available at the fundamental wavelengths of 1064 and 1053nm, the innovative water-free laser crystal end-pumping technology produces Gaussian-like, low divergence laser beams with high peak powers, enabling efficient harmonics conversion through the 5th harmonic.

Microchip Series

Bright Microlaser Microchip SB1 Laser

The Microchip Series, from BrightMicroLaser, are ultra-compact, passively q-switched, single longitudinal mode (SLM), narrow linewidth, DPSS lasers that feature pulse durations from 400 ps to 2 ns, energy levels up to 80 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.