3 Nanosecond Lasers

On this page, we have a list of all of the 3 Nanosecond (ns) pulse width lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

Three different parameters determine the output power of a pulsed laser; the laser’s pulse width, the pulse energy, and the pulse repetition rate.

See all of our Nanosecond Lasers.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Wedge Series

Wedge-XF-1064: 1064nm Picosecond Laser

The Wedge series of DPSS lasers is designed for OEM applications such as micromachining, LIDAR, LIBS, and more. Based on proprietary fast Q-switching technology, this series is compact, sealed, and monolithic, making them insensitive to vibrations & harsh environments. High peak powers, relatively low energy and low heat generation allow efficient ablation and non-linear interaction. Available from 266-3106nm, up to 8 mJ pulse energy @ 1064, the compact and lightweight package benefits LIDAR and aerospace applications, while short pulses provide exact time-of-flight measurements.

CEUV Series

R0Z2-Image-Compact-Efficient-UV-LaserThe CEUV series is a commercial line of compact and efficient DPSS laser sources, capable of operating over a wide range of pulsing conditions (duty-cycle and PRF), in a low SWaP package, with average power up to ≈5W @ 266nm, 10W @ 355nm or 532nm, 20W @ 1064nm. This series of DPSS lasers provides a combination of compact, efficient, and high-power performance in a rugged design suitable for harsh environments and airborne applications. The design has been tested in brassboard hardware and a prototype is being developed.

Onda Series

Onda 532nm: 532nm High Energy Laser

The Onda series is a DPSS nanosecond OEM laser platform designed for high-end applications requiring excellent beam quality and high peak power in materials such as metals, glass, plastics, and various delicate and hard materials. This compact and easy to use laser series is available in wavelengths of 266, 355, 532, and 1064nm, with an extended operating temperature range and superior performance to cost ratio. The Onda seriesinternal optical layout and accurate temperature management enable high output energies without compromising the lifetime of the THG and FHG stages.