50nJ Lasers

Unlike continuous wave lasers, the output of these 50nJ pulsed lasers cannot be specified by their output power alone. This is because the output power of a pulsed laser is determined by three different parameters, the laser’s pulse width, pulse energy, and pulse repetition rate.

On this page, we have a list of all of the 50nJ lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Manufacturer

Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
ALCOR 5W: 1064nm Ultra-Compact Femtosecond Laser ALCOR 920 Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers 920 1.0, 2.0, 4.0 0.0125, 0.025, 0.050 100fs, 110fs, 130fs 80MHz (Optional: 40MHz) Active

Alcor Series

Alcor

ALCOR is the most advanced femtosecond fiber laser emitting at 920 nm or 1064 nm, designed explicitly for multiphoton microscopy instrumentation and industrial OEM integration, working with 24/7 operation in an ultra-compact, robust and air-cooled format. Featuring the Alcor 920 4W, with the highest average power commercially available, as well as the XSight and FLeX Fiber external modules, allowing for fine & fast gating and power control, GDD precompensation, and fiber-coupling (FleX Fiber). 520 nm, 780 nm, and 1040 nm versions also available.