SHIPS TODAY
0
Cart
Solid State Lasers and Laser Diodes from RPMC Lasers Inc » Products » 1.0

1uJ Lasers

Unlike continuous wave lasers, the output of these 1uJ pulsed lasers cannot be specified by their output power alone. This is because the output power of a pulsed laser is determined by three different parameters, the laser’s pulse width, pulse energy, and pulse repetition rate.

On this page, we have a list of all of the 1uJ lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Talk to a Product Manager

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Manufacturer

more more
Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
Altair: Femtosecond Laser Altair Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers 1040 10.0, 20.0 0.125, 0.250, 1.0 150fs, 250fs 30MHz, 80MHz, Single shot to 40MHz Active
DIADEM Series Diadem 1300 Pulsed DPSS Lasers, Ultrafast Lasers 1300 2.0 1.0 150fs Single shot to 2MHz Active
Bright Microlaser Microchip SB1 Laser SB1-266 Pulsed DPSS Lasers, Microchip Lasers 266 0.002, 0.005 0.500, 1.0, 2.0 1.3ns 1kHz, 5kHz, 10kHz Passive
Bright Microlaser Microchip SB1 Laser SB1-355 Pulsed DPSS Lasers, Microchip Lasers 355 0.010 1.0 1.3ns 10kHz Passive
Bright Microlaser Microchip SB1 Laser SB1-473 Pulsed DPSS Lasers, Microchip Lasers 473 0.0009, 0.010, 0.015 1.0, 3.0, 9.0 2ns 100Hz, 5kHz, 10kHz Passive
more more

Altair Series

Altair: Femtosecond Laser

The ALTAIR series produces high average powers up to 20W and ultrashort femtosecond pulses of <150 fs (<250 fs for VERSA configuration) at a high repetition rate of 80 MHz (others available). Ideal for bioimaging/biophotonics applications such as multiphoton microscopy, the ALTAIR provides high stability and excellent beam quality due to its mode-locked fiber design. It offers a range of options such as GDD pre-compensation, custom wavelengths, harmonics, repetition rates, and more. With a simplified fiber design that requires little to no maintenance compared to DPSS and Ti:Sapphire counterparts, the ALTAIR is the preferred solution for both OEM and researchers in the microscopy and life sciences fields.  

Diadem Series

DIADEM Series

The DIADEM series is a compact, versatile, air-cooled, high-energy, ultrafast femtosecond laser, operating at 1030 or 1064 nm for advanced micro-machining applications. Available with up to 40µJ of pulse energy, pulse widths down to ≈ 400 fs, an M² < 1.2, and single-shot up to 2MHz repetition rate, the DIADEM has many pulse control features such as adjustable pulse duration, selectable repetition rate from 40 MHz down to single-shot, or fine pulse energy tuning so that pulses can be emitted in various modes (on demand via external signal, burst of pulses with configurable pulse separation). A 1300 nm version is also available for deep brain imaging. 

Microchip Series

Bright Microlaser Microchip SB1 Laser

The Microchip series is a line of ultra-compact, passively q-switched, single longitudinal mode (SLM), narrow linewidth, DPSS lasers that offer exceptional performance in a compact form factor. The lasers feature pulse durations ranging from 400 ps to 2 ns, energy levels up to 80 µJ, and repetition rates up to 100 kHz. Available in wavelengths from the UV to the NIR, this series is designed for OEM integrators and researchers working with LIDAR, 3D scanning, LIBS, night vision, and more. The lasers offer both nanosecond and picosecond options and are interchangeable with the same form factor and electrical and software interfaces across wavelengths, making them a flexible and versatile solution.