PowerMir 9.4um

Quantum Cascade Laser (QCL), Pulsed, High power, 9.4um

Key Features:

  • Maximum power – 300mW
  • Mode of operation Quasi-CW, high duty cycled pulsed
  • Pulse frequency > 500 kHz
  • Central wavelength(3) 9.4 µm /- 0.1 µm
  • Divergence for the lasers with standard beam – 3 to 6 mrad (horizontal) – 2 to 4 mrad (vertical)
  • ITAR free technology
  • QCW operating mode for increased wall-plug efficiency and reduced thermal dissipation
  • Reproducible specs manufacturing for series productions

 

There are many configurations and options available. If you do not see exactly what you need below, please contact us!

Need Quantities? Have a question?

POPULAR CONFIGURATIONS:

 
Picture
Part Number
Part Description
Datasheet
Lead Time
 
mirSense Turnkey system PW9400100HSTK1A

QCL, 9.4um, 100mW QCW, Turnkey System

Inquire

Get Quote
brass or gold colored ultra-compact high heat load laser diode package attached to a two-level OEM circuit board module PW9400100HSPCB

QCL, 9.4um, 100mW QCW, POEM System, HHL + PCB

Inquire

Get Quote
brass or gold colored ultra-compact high heat load laser diode housing PW9400100HSNA

QCL, 9.4um, 100mW QCW, HHL Package

Inquire

Get Quote
Chip on submount PW9400100SCHIP

QCL, 9.4um, 100mW QCW, Chip on Submount

Inquire

Get Quote
mirSense Turnkey system PW9400300HSTK1A

QCL, 9.4um, 300mW QCW, Turnkey System

Inquire

Get Quote
brass or gold colored ultra-compact high heat load laser diode package attached to a two-level OEM circuit board module PW9400300HSPCB

QCL, 9.4um, 300mW QCW, POEM System, HHL + PCB

Inquire

Get Quote
brass or gold colored ultra-compact high heat load laser diode housing PW9400300HSNA

QCL, 9.4um, 300mW QCW, HHL Package

Inquire

Get Quote
Chip on submount PW9400300SCHIP

QCL, 9.4um, 300mW QCW, Chip on Submount

Inquire

Get Quote
mirSense Turnkey system PW9400300-9400300STK2A

QCL, 9.4um, 2X300mW QCW, 600mW QCW, Turnkey System

Inquire

Get Quote

The PowerMir series is a line of high-power, pulsed Quantum Cascade Lasers based on proprietary technology, available in turnkey benchtop systems, OEM driver + laser module, or HHL package. Our lasers operate in Quasi-Continuous Wave (QCW) mode, enhancing wall-plug efficiency and thermal dissipation. The PowerMir series is ITAR-free, featuring high-powered diodes that emit in the primary atmospheric transmission bands. Our lasers produce a circular TEM00 Gaussian beam for superior performance.

Benefits:

  • High power and wall-plug efficiency:
    • The PowerMir series delivers outstanding power and efficiency, allowing customers to achieve their desired performance levels while minimizing energy costs.
  • Flexibility in configuration:
    • Customers can choose from various system configurations, including plug-and-play benchtop turnkey systems, OEM driver + laser modules, or just the HHL-packaged lasers. This flexibility allows customers to tailor their purchases to their specific needs and applications.
  • Reproducible manufacturing:
    • With reproducible specs manufacturing, customers can be confident that their orders will consistently meet their expectations and specifications.
  • Circular beam option:
    • The circular beam option reduces the amount of effort customers need to put into shaping the beam, saving them time and resources.
  • ITAR-free technology:
    • With ITAR-free technology, customers can rest assured that they are not violating any export control regulations.
  • Highest quality beam:
    • The TEM00 Gaussian beam allows for the highest quality beam, ensuring customers achieve the precision and accuracy required for their applications.
  • User-friendly software:
    • The included Windows software is easy to use, minimizing the learning curve for customers and allowing them to quickly integrate the PowerMir series into their workflows.

The entire laser package is only 1.75 x 1.25 x 0.75 inches, weighing only 70 grams, making it ideal for integration into aerial combat vehicles where size and weight are of the utmost importance. In addition to the lasers, mirSense also offers a 24 VDC OEM laser driver for ease of integration. These drivers provide TEC control, frequency modulation, and external TTL triggering, in addition to basic ON/OFF functionality. Designed to be extremely lightweight and compact, they measure only 1.75 x 4.33 x 1.00 inches and weigh just 120 grams. The form factor, high average power, and wall-plug efficiency of these QCLs all combine to make the PowerMir series ideally suited for countermeasure and other defense applications.

Overall, the PowerMir series provides customers with powerful, efficient, and customizable laser solutions that are reliable and easy to use, enabling them to achieve their desired performance levels with minimal hassle.

If you have any questions or need more information, please contact us.

We offer three configurations for the 4µm PowerMir:


PowerMir 4µm HHL PackagemirSense HHL

For clients who wish to purchase only the laser without the driving electronics, all of our laser wavelengths are available in a packaged version alone. Our standard offer is in an HHL package including the thermal regulation and a collimating lens. We are used to developing and supplying custom packages as well.  For specific projects, mirSense can also supply QCL chips on submounts on demand.


PowerMir 4µm Features:

  • Standard high heat loads package (9-pins HHL) or custom package on request
  • Integrated Peltier TEC cooler
  • Integrated collimating lens (High beam quality, M²<1.5)
  • Possibility of chips on submount delivery
  • Optional circular beam with 2.5mrad divergence

PowerMir 4µm HHL Package with Driver (POEM system)mirSense POEM driver+HHL laser

The PowerMir OEM system (POEM) is meant for customers who wish to integrate a QCL high-powered source inside their system (for example a DIRCM system). Each POEM is a compact light-weight and robust system made up of a packaged QCL laser plugged to a driving electronics board.

 

This board is embedded with unprecedented functionalities such as laser driver, complex programmable modulation schemes and of course full laser protection.  The onboard firmware protects the laser from burning through temperature management of the TEC element. The customer can communicate with the board through MODBUS commands and a TTL trigger allows the customer to modulate each board with confidentiality.  Several POEM systems can be combined to combine and increase the total optical output power.


PowerMir 4µm HHL Package with Driver Features:

  • Compact stand-alone OEM product for system integration
  • Powerful FPGA-based architecture
  • MODBUS communication for system integration and user-friendly PC software for configuration and tests
  • External TTL for synchronization
  • Cost effective for series-productions

PowerMir Turnkey HHL Package with DrivermirSense Turnkey system

For lab experiments, we offer a plug-and-play easy to use turnkey system that includes laser heads, a driver and the cooling mechanism as well as a user-friendly PC software.  In order to accommodate you in your future projects, the mirSense turnkey platform is very modular. It’s able to control simultaneously 2 different laser heads (with different or identical wavelengths).


PowerMir Turnkey Features:

  • Plug-and-play system perfect to use inside a lab
  • Stand alone system including: laser head, driver, heat exchanger
  • User-friendly PC software allows users to:
    • Turn ON/OFF the laser
    • Easily change the operating mode (power, modulation)
  • External TTL for synchronization
  • Red laser beam to facilitate alignment
Wavelength (nm)

Output power (W)

,

Mode

Output

How can we help you?

Talk to one of our experienced product managers today!

Contact us

Component FAQs
Can I operate multiple laser diodes from the same power supply?

Can I operate multiple laser diodes from the same power supply?

The same power supply can drive multiple laser diodes if they are connected in series, but they must never be connected in parallel. When two diodes are connected in series, they will function properly as long as the compliance voltage is large enough to cover the voltage drop across each diode. For example, suppose you are trying to power two diode lasers, each with an operating voltage of 1.9 V, and connect the two in series. In that case, the pulsed or CW laser driver must have a total voltage capacity greater than 3.8 V. This configuration works because diodes share the same current when connected in series. In contrast, when two diodes are connected in parallel, the current is no longer shared between the two diodes. Get more details on the topic in this article: “Can I Operate Multiple Laser Diodes From the Same Power Supply?” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

Can laser diodes emit green, blue, or UV light?

Can laser diodes emit green, blue, or UV light?

The output wavelength of a semiconductor laser is based on the difference in energy between the valance and conduction bands of the material (bandgap energy). Since the energy of a photon is inversely proportional to its wavelength, this means that a larger bandgap energy will result in a shorter emission wavelength. Due to the relatively wide bandgap energy of 3.4 eV, gallium nitride (GaN) is ideal for the production of semiconductor optoelectronic devices, producing blue wavelength light without the need for nonlinear crystal harmonic generation. Since the mid-’90s, GaN substrates have been the common material utilized for blue LEDs. In recent years, GaN based laser technology has provided blue, green and UV laser diodes, now available in wavelengths from 375 nm to 521 nm, with output powers exceeding 100 watts. Read our article, titled “Gallium Nitride (GaN) Laser Diodes: Green, Blue, and UV Wavelengths” to learn more about GaN Based Laser Diodes, available through RPMC. Get more information from our Lasers 101, Blogs, Whitepapers, and FAQs pages in our Knowledge Center!

How long will a laser diode last?
How long will a laser diode last?

Honestly, it depends on several factors, and there is no simple chart to cover everything. Typical diode lifetimes are in the range of 25,000 to 50,000 hours. Though, there are lifetime ratings outside this range, depending on the configuration. Furthermore, there are a wide range of degradation sources that contribute to a shorter lifespan of laser diodes. These degradation sources include dislocations that affect the inner region, metal diffusion and alloy reactions that affect the electrode, solder instability (reaction and migration) that affect the bonding parts, separation of metals in the heatsink bond, and defects in buried heterostructure devices. Read more about diode lifetime and contributing factors in this article: “Understanding Laser Diode Lifetime.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What factors affect the lifetime of laser diodes?
What factors affect the lifetime of laser diodes?

There are a great many factors that can increase or decrease the lifetime of a laser diode. One of the main considerations is thermal management. Mounting or heatsinking of the package is of tremendous importance because operating temperature strongly influences lifetime and performance. Other factors to consider include electrostatic discharge (ESD), voltage and current spikes, back reflections, flammable materials, noxious substances, outgassing materials (even thermal compounds), electrical connections, soldering method and fumes, and environmental considerations including ambient temperature, and contamination from humidity and dust. Read more about these critical considerations and contributing factors in this article: “How to Improve Laser Diode Lifetime: Advice and Precautions on Mounting.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What is a laser diode?
What is a laser diode?

A Laser Diode or semiconductor laser is the simplest form of Solid-State Laser. Laser diodes are commonly referred to as edge emitting laser diodes because the laser light is emitted from the edge of the substrate. The light emitting region of the laser diode is commonly called the emitter. The emitter size and the number of emitters determine output power and beam quality of a laser diode. Electrically speaking, a laser diode is a PIN diode. The intrinsic (I) region is the active region of the laser diode. The N and P regions provide the active region with the carriers (electrons and holes). Initially, research on laser diodes was carried out using P-N diodes. However, all modern laser diodes utilize the double-hetero-structure implementation. This design confines the carriers and photons, allowing a maximization of recombination and light generation. If you want to start reading more about laser diodes, try this whitepaper “How to Improve Laser Diode Lifetime.” If you want to read more about the Laser Diode Types we offer, check out the Overview of Laser Diodes section on our Lasers 101 Page!

What is the difference between laser diodes and VCSELs?
What is the difference between laser diodes and VCSELs?

Laser Diodes and VCSELs are semiconductor lasers,  the simplest form of Solid State Lasers.  Laser diodes are commonly referred to as edge emitting laser diodes because the laser light is emitted from the edge of the substrate. The light emitting region of the laser diode is commonly called the emitter.  The emitter size and the quantity of emitters determine output power and beam quality of a laser diode. These Fabry Perot Diode Lasers with a single emission region (Emitter) are typically called laser diode chips, while a linear array of emitters is called laser diode bars. Laser diode bars typically use multimode emitters, the number of emitters per substrate can vary from 5 emitters to 100 emitters. VCSELs (Vertical Cavity Surface Emitting Laser) emit light perpendicular to the mounting surface as opposed to parallel like edge emitting laser diodes.  VCSELs offer a uniform spatial illumination in a circular illumination pattern with low speckle. If you want to read more about lasers in general, and help narrowing down the selection to find the right laser for you, check out our Knowledge Center for our Blogs, Whitepapers, and FAQ pages, as well as our Lasers 101 Page!VCSEL

What’s the difference between single transverse mode & single longitudinal mode?

What’s the difference between single transverse mode & single longitudinal mode?

Within the laser community, one of the most overused and often miscommunicated terms is the phrase “single mode.”  This is because a laser beam when traveling through air takes up a three-dimensional volume in space similar to that of a cylinder; and just as with a cylinder, a laser beam can be divided into independent coordinates each with their own mode structure.  For a cylinder we would call these the length and the cross-section, but as shown in the figure below for a laser beam, we define these as the transverse electromagnetic (TEM) plane and the longitudinal axis.   Both sets of modes are fundamental to the laser beam’s properties, since the TEM modes determine the spatial distribution of the laser beams intensity, and the longitudinal modes determine the spectral properties of the laser.  As a result, when a laser is described as being “single-mode” first you need to make sure that you truly understand which mode is being referred to.  Meaning that you must know if the laser is single transverse mode, single longitudinal mode, or both. Get all the information you need in this article: “What is Single Longitudinal Mode?” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

Component FAQs
Can I operate multiple laser diodes from the same power supply?

Can I operate multiple laser diodes from the same power supply?

The same power supply can drive multiple laser diodes if they are connected in series, but they must never be connected in parallel. When two diodes are connected in series, they will function properly as long as the compliance voltage is large enough to cover the voltage drop across each diode. For example, suppose you are trying to power two diode lasers, each with an operating voltage of 1.9 V, and connect the two in series. In that case, the pulsed or CW laser driver must have a total voltage capacity greater than 3.8 V. This configuration works because diodes share the same current when connected in series. In contrast, when two diodes are connected in parallel, the current is no longer shared between the two diodes. Get more details on the topic in this article: “Can I Operate Multiple Laser Diodes From the Same Power Supply?” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

Can laser diodes emit green, blue, or UV light?

Can laser diodes emit green, blue, or UV light?

The output wavelength of a semiconductor laser is based on the difference in energy between the valance and conduction bands of the material (bandgap energy). Since the energy of a photon is inversely proportional to its wavelength, this means that a larger bandgap energy will result in a shorter emission wavelength. Due to the relatively wide bandgap energy of 3.4 eV, gallium nitride (GaN) is ideal for the production of semiconductor optoelectronic devices, producing blue wavelength light without the need for nonlinear crystal harmonic generation. Since the mid-’90s, GaN substrates have been the common material utilized for blue LEDs. In recent years, GaN based laser technology has provided blue, green and UV laser diodes, now available in wavelengths from 375 nm to 521 nm, with output powers exceeding 100 watts. Read our article, titled “Gallium Nitride (GaN) Laser Diodes: Green, Blue, and UV Wavelengths” to learn more about GaN Based Laser Diodes, available through RPMC. Get more information from our Lasers 101, Blogs, Whitepapers, and FAQs pages in our Knowledge Center!

How long will a laser diode last?
How long will a laser diode last?

Honestly, it depends on several factors, and there is no simple chart to cover everything. Typical diode lifetimes are in the range of 25,000 to 50,000 hours. Though, there are lifetime ratings outside this range, depending on the configuration. Furthermore, there are a wide range of degradation sources that contribute to a shorter lifespan of laser diodes. These degradation sources include dislocations that affect the inner region, metal diffusion and alloy reactions that affect the electrode, solder instability (reaction and migration) that affect the bonding parts, separation of metals in the heatsink bond, and defects in buried heterostructure devices. Read more about diode lifetime and contributing factors in this article: “Understanding Laser Diode Lifetime.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What factors affect the lifetime of laser diodes?
What factors affect the lifetime of laser diodes?

There are a great many factors that can increase or decrease the lifetime of a laser diode. One of the main considerations is thermal management. Mounting or heatsinking of the package is of tremendous importance because operating temperature strongly influences lifetime and performance. Other factors to consider include electrostatic discharge (ESD), voltage and current spikes, back reflections, flammable materials, noxious substances, outgassing materials (even thermal compounds), electrical connections, soldering method and fumes, and environmental considerations including ambient temperature, and contamination from humidity and dust. Read more about these critical considerations and contributing factors in this article: “How to Improve Laser Diode Lifetime: Advice and Precautions on Mounting.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What is a laser diode?
What is a laser diode?

A Laser Diode or semiconductor laser is the simplest form of Solid-State Laser. Laser diodes are commonly referred to as edge emitting laser diodes because the laser light is emitted from the edge of the substrate. The light emitting region of the laser diode is commonly called the emitter. The emitter size and the number of emitters determine output power and beam quality of a laser diode. Electrically speaking, a laser diode is a PIN diode. The intrinsic (I) region is the active region of the laser diode. The N and P regions provide the active region with the carriers (electrons and holes). Initially, research on laser diodes was carried out using P-N diodes. However, all modern laser diodes utilize the double-hetero-structure implementation. This design confines the carriers and photons, allowing a maximization of recombination and light generation. If you want to start reading more about laser diodes, try this whitepaper “How to Improve Laser Diode Lifetime.” If you want to read more about the Laser Diode Types we offer, check out the Overview of Laser Diodes section on our Lasers 101 Page!

What is the difference between laser diodes and VCSELs?
What is the difference between laser diodes and VCSELs?

Laser Diodes and VCSELs are semiconductor lasers,  the simplest form of Solid State Lasers.  Laser diodes are commonly referred to as edge emitting laser diodes because the laser light is emitted from the edge of the substrate. The light emitting region of the laser diode is commonly called the emitter.  The emitter size and the quantity of emitters determine output power and beam quality of a laser diode. These Fabry Perot Diode Lasers with a single emission region (Emitter) are typically called laser diode chips, while a linear array of emitters is called laser diode bars. Laser diode bars typically use multimode emitters, the number of emitters per substrate can vary from 5 emitters to 100 emitters. VCSELs (Vertical Cavity Surface Emitting Laser) emit light perpendicular to the mounting surface as opposed to parallel like edge emitting laser diodes.  VCSELs offer a uniform spatial illumination in a circular illumination pattern with low speckle. If you want to read more about lasers in general, and help narrowing down the selection to find the right laser for you, check out our Knowledge Center for our Blogs, Whitepapers, and FAQ pages, as well as our Lasers 101 Page!VCSEL

What’s the difference between single transverse mode & single longitudinal mode?

What’s the difference between single transverse mode & single longitudinal mode?

Within the laser community, one of the most overused and often miscommunicated terms is the phrase “single mode.”  This is because a laser beam when traveling through air takes up a three-dimensional volume in space similar to that of a cylinder; and just as with a cylinder, a laser beam can be divided into independent coordinates each with their own mode structure.  For a cylinder we would call these the length and the cross-section, but as shown in the figure below for a laser beam, we define these as the transverse electromagnetic (TEM) plane and the longitudinal axis.   Both sets of modes are fundamental to the laser beam’s properties, since the TEM modes determine the spatial distribution of the laser beams intensity, and the longitudinal modes determine the spectral properties of the laser.  As a result, when a laser is described as being “single-mode” first you need to make sure that you truly understand which mode is being referred to.  Meaning that you must know if the laser is single transverse mode, single longitudinal mode, or both. Get all the information you need in this article: “What is Single Longitudinal Mode?” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!