TO Can Laser Diode Mount

Key Features:

  • 1.3W Thermal Capacity at 25°C
  • Active TEC cooling
  • TO-5.6 or TO-9 devices
  • Switch selectable device configuration
  • No wiring required


There are many configurations and options available. If you do not see exactly what you need below, please contact us!

Need Quantities? Have a question?


Part Number
Part Description
Lead Time

TO Can Laser Diode Mount



Available on backorder

The TO-Can Laser Mounts support TO-Can devices with active TEC cooling for TO-5.6 or TO-9 lasers. The device is inserted into a socket and clamped to the cold plate by a machined stainless steel bracket. The 224 is designed for post-mounting (post-mount not included), with 8-32 and M4 threaded holes on the bottom of the mount.

The 224 directly supports 30mm cage systems, with or without the standard cover installed. Looking to integrate 1″ lens tube optics? Add the 224-C-02 Opto-Mech Cover, which adds support for 1″ lens tube systems and also supports 30mm cage systems.

The 224 requires no wiring to configure it for your device. Instead, there are two switches to configure for either common anode or common cathode, and a third switch to optionally earth ground the case of the laser.  The laser driver and temperature controller connections are made through a DB-9 LDD and a DB-15 TEC connector on the back of the mount, which allows for quick connections to any Arroyo Instruments controllers.

How can we help you?

Talk to one of our experienced product managers today!

Contact us