10W Lasers

What are 10W Lasers?

10W Lasers can be any laser that designates 10W of average output power, providing either CW (continuous-wave) or pulsed output. CW Lasers are always defined in average output power. Pulsed Lasers with an output power defined in Watts or Milliwatts usually define the laser’s average power, not the peak power of the laser.

Our 10W Laser Products

RPMC Lasers provides a wide selection of laser products, producing 10W of average power output, including multi-emitter laser diodes, laser diode arrays (bars), VCSELs, multi-wavelength lasers, pulsed DPSS lasers, pulsed fiber lasers, ultrafast lasers, and fiber amplifiers.

10W lasers are available in a number of different configurations. For some examples, RPMC offers a 2um Fiber Amplifier, with a 1750-2054nm wavelength rang, and up to 10W output power, perfect for LIDAR and telecommunications applications.

We have an ultrafast, femtosecond DPSS laser, with 1040nm wavelength, 10W average output power, 250 fs pulse width, and an adjustable rep rate from 0 to 40MHz, with energy per pulse up to 1uJ (10W at 10MHz), perfect for fluorescence lifetime, micromachining, non-thermal ablation, multi-photon microscopy, and more.

We also provide an unmounted, single-emitter 10W laser diode, with 808nm wavelength, 200um emitter, and 4mm cavity length, perfect for aesthetics, cladding, night vision, and welding applications.

Our final example is a compact nanosecond laser, with 532nm wavelength, 10W average output power, and a PRF from 10 to 100kHz, perfect for marking, scribing, trimming, texturing, thin film removal, PCB production, and much more!

It always depends on specific application requirements, but likely we have the right, standard solution for your application. However, if you don’t see exactly what you need, we can likely provide a customized product or a fully customized solution to better fit your needs.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Mode

Output

Linewidth

Series

Picture Part Number Type Wavelength (nm) Output power (W) Mode Output Linewidth Pulse energy (uJ) Pulse width Rep rate
cgoa cgoa 3 goa hpoa 1.5um Fiber Amplifiers Fiber Amplifiers 1529-1605 0.0001, 0.00025, 0.001, 0.0016, 0.500, 1.0, 2.0, 5.0, 10.0 CW
Fiber Amplifiers - HPOA - THPOA - UHPOA 1um Fiber Amplifiers Fiber Amplifiers 1030-1100 5.0, 10.0, 40.0 CW
thpoa2 uhpoa2p 2um Fiber Amplifiers Fiber Amplifiers 1750-2054 10.0 CW
Aero-1064 Pulsed DPSS Lasers 1064 5.0, 10.0 50000.0, 100000.0, 200000.0 20ns Single Shot to 50Hz, Single Shot to 100Hz
AIRTRAC-Green Pulsed DPSS Lasers, Mil-Spec Lasers 532, 1064 10.0 70000.0 4ns - 7ns 0-25Hz
R0Z2-Image-Compact-Efficient-UV-Laser CEUV Pulsed DPSS Lasers 266, 355, 532, 1064 5.0, 10.0, 20.0 3ns 10kHz to 1MHz
Jasper X0 Pulsed Fiber Lasers, Ultrafast Lasers 1030 10.0, 20.0, 30.0, 60.0 50.0, 100.0, 200.0 270fs - 8ps Single shot to 20MHz
Unmounted Laser Diode Unpackaged Laser Diode JDL-1060 Single Emitter, Array (Bar) 1060 10.0, 40.0, 60.0, 80.0, 120.0, 200.0, 250.0, 350.0 Multimode Free Space
Unmounted Laser Diode Unpackaged Laser Diode JDL-808 Single Emitter, Array (Bar) 808 6.0, 8.0, 10.0, 20.0, 40.0, 50.0, 60.0, 80.0, 92.0, 200.0, 300.0 Multimode Free Space
Image of a modern OEM laser housing made of high-grade aluminum, long silver rectangle body with fan slits, output window and stickers Lampo SHG Pulsed DPSS Lasers, Ultrafast Lasers 532 10.0 150.0 50ps-70ps 50kHz to 40MHz
Single Emitter LDX-XXXX-808 Single Emitter 808 1.2, 2.0, 3.0, 4.0, 6.0, 10.0 Multimode MM Fiber, Free Space
Single Emitter LDX-XXXX-915 Single Emitter 915 4.0, 6.0, 10.0 Multimode MM Fiber, Free Space
Single Emitter LDX-XXXX-960 Single Emitter 960 10.0 Multimode MM Fiber, Free Space
Single Emitter LDX-XXXX-980 Single Emitter 980 1.5, 4.0, 5.0, 6.0, 10.0 Multimode MM Fiber, Free Space
NPS-1064 Pulsed DPSS Lasers, Ultrafast Lasers 1064 0.050, 5.0, 10.0 Narrow 0.125, 0.250 7ps 40MHz
Onda 532nm: 532nm High Energy Laser Onda 532nm Pulsed DPSS Lasers 532 5.0, 10.0 400.0, 750.0 2ns - 14ns Single Shot to 100kHz
K Series RPK445 Single Emitter, Multi-Emitter 445 0.800, 3.0, 10.0, 20.0, 50.0, 100.0, 150.0, 200.0 Multimode MM Fiber
Multi-Emitter Laser Diodes RPK940 Single Emitter, Multi-Emitter 940 10.0, 11.0, 20.0, 30.0, 70.0, 120.0, 150.0, 200.0 Multimode MM Fiber
RPK976 Single Emitter, Multi-Emitter, VBG 976 10.0, 20.0, 30.0, 70.0, 150.0, 200.0, 330.0, 510.0 Multimode MM Fiber Narrow
KA64HAMCA-10.00W: 1064nm Fiber Coupled Laser Diode RPKA64 Multi-Emitter 1064 10.0, 20.0 Multimode MM Fiber
RWLD 5.5mm Package Laser Diode RWLD-1064M Single Emitter 1064 8.0, 10.0 Multimode Free Space
RWLD 5.5mm Package Laser Diode RWLD-808M Single Emitter 808 0.300, 0.500, 1.0, 2.0, 3.0, 5.0, 8.0, 10.0 Multimode Free Space
RWLD 5.5mm Package Laser Diode RWLD-915M Single Emitter 915 10.0, 12.0 Multimode Free Space
RWLD 5.5mm Package Laser Diode RWLD-940M Single Emitter 940 10.0, 12.0 Multimode Free Space
RWLD 5.5mm Package Laser Diode RWLD-980M Single Emitter 980 1.0, 3.0, 4.0, 10.0, 12.0, 15.0 Multimode Free Space
RWLP-445M: 445nm MultiMode Laser Diode RWLP-445M Single Emitter 445 0.050, 0.080, 0.800, 1.0, 3.5, 10.0, 20.0 Multimode MM Fiber
RWLP-808M: 808nm MultiMode Laser Diode RWLP-808M Single Emitter 808 0.100, 0.150, 0.200, 0.300, 2.0, 4.0, 5.0, 8.0, 10.0, 25.0 Multimode MM Fiber
RWLP-915M: 915nm MultiMode Laser Diode RWLP-915M Single Emitter 915 2.0, 10.0, 20.0, 30.0, 55.0 Multimode MM Fiber
RWLP-940M: 940nm MultiMode Laser Diode RWLP-940M Single Emitter 940 0.200, 2.0, 10.0, 20.0, 30.0 Multimode MM Fiber
RWLP-980M: 980nm MultiMode Laser Diode RWLP-980M Single Emitter 980 0.100, 0.150, 2.0, 10.0, 20.0, 30.0, 55.0 Multimode MM Fiber
SOL-06: 1064nm compact nanosecond laser SOL-1064 Pulsed DPSS Lasers 1064 4.0, 6.0, 10.0, 20.0, 30.0, 40.0 300.0, 450.0, 900.0, 1500.0, 2000.0 5ns - 35ns, 7ns - 35ns, 10ns - 40ns, 10ns - 50ns, 15ns - 60ns Single Shot to 100kHz
SOL-03-532: 532nm Nanosecond Laser SOL-532 Pulsed DPSS Lasers 532 3.0, 5.0, 10.0 200.0, 400.0, 650.0 15ns - 70ns, 10ns - 50ns, 10ns - 60ns Single Shot to 100kHz

FA Series

fa 1.5um 1um 2umThe FA series offers a variety of standard and custom fiber amplifiers. Available in both OEM and Turnkey formats, our 1, 1.5, and 2um fiber amplifiers are manufactured to Telcordia standards and can be customized to meet your application requirements. With output powers of up to >40dBM and options for linear or random polarization, narrow linewidth, low noise, and input and output monitoring, our fiber amplifiers are ideal solutions for applications such as intra-satellite free space communication, optical transport, FTTH & CATV, RF video overlay, and pulsed amplification.

Aero Series

The Aero Series is a high-energy, nanosecond pulsed DPSS laser, available at 266, 355, 532, and 1064nm, with up to 10W output power & 200mJ pulse energy at 1064. This series provides unparalleled precision and accuracy in even the most challenging environments. All models come enclosed in an extremely compact and ruggedized single unit with a conductively cooled heatsink and a water-cooled option. It comes with available options for beam expanding and collimating optics. This laser series is ideal for LIBS, spectroscopy, and Atmospheric LIDAR applications.

Airtrac-MIL Series

AIRTRAC-LD

The AIRTRAC-MIL series is a ruggedized, high-shock, ultra-compact, actively q-switched, low-SWaP, DPSS laser, available with up to 70 mJ @ 532 & 1064 nm. Configurations for laser designation are available in a complete system weighing less than 1 lb. The athermal design of the AIRTRAC ensures high laser pulse energy, and stable performance over the full temperature range with low beam divergence. 

CEUV Series

R0Z2-Image-Compact-Efficient-UV-LaserThe CEUV series is a commercial line of compact and efficient DPSS laser sources, capable of operating over a wide range of pulsing conditions (duty-cycle and PRF), in a low SWaP package, with average power up to ≈5W @ 266nm, 10W @ 355nm or 532nm, 20W @ 1064nm. This series of DPSS lasers provides a combination of compact, efficient, and high-power performance in a rugged design suitable for harsh environments and airborne applications. The design has been tested in brassboard hardware and a prototype is being developed.

Jasper Series

The Jasper series is a diverse set of high-performance femtosecond fiber lasers providing different solutions based on a standard technology. The series includes the high-power Jasper X0 (200 µJ pulse energy / 60 W average power), the compact Jasper Micro (5 µJ pulse energy / 7 W average power) in a space-saving design, and the Jasper Flex for microprocessing (30 µJ pulse energy). Each model provides a fast warm-up time, long-term stability, and hands-free operation. Whether you need high power, compactness, or specific processing capabilities, the Jasper series has a solution.

JDL Series

The JDL series offers industry-leading high-power unmounted laser diode bars in the 760 nm – 1060 nm spectral region. Our unmounted laser bars provide a wide range of emitter configurations and cavity lengths, with operational modes up to 500 W. We offer low fill factor bars suitable for fiber coupling, high-power bars up to 300W for CW or hard-pulse DDL applications, and QCW bars up to 500W for QCW or long-pulse optical pumping and medical applications.

Lampo Series

Image of a modern OEM laser housing made of high-grade aluminum, long silver rectangle body with fan slits, output window and stickersThe Lampo Series is a line of compact ultrafast lasers that deliver megawatt-level ps laser pulses at a selectable PRR from 50 kHz to 4 MHz. Available in IR (1064 nm), SHG (532 nm), and Deep-UV (266 nm) versions, the series offers pulse durations < 70 ps and average power up to 20W, 10W, and 1.5W respectively. With pulse energy up to 250uJ, 150uJ, and 30uJ, these lasers are ideal for a wide range of scientific, industrial, defense, medical, biological, and LIDAR applications. Built into a rugged, air-cooled single-unit laser head, these lasers are easy to operate and integrate, making them a valuable tool for sophisticated laser systems and lab applications.

LDX Series

The LDX Series of made-in-the-US, high-power, multimode laser diodes provide wavelengths from 400nm – 1900nm, a wide range of output powers and package types, as well as completely customized solutions. We have been offering these high-quality laser diodes for over 25 years. The performance, reliability, and lifetimes are time tested, and if for some reason there is an issue, we will make it right. 

Nps Series

image of a sleek tunable laser platform

The NPS series of ultrafast lasers is the ultimate solution for OEM integrators and researchers working with nonlinear optics applications like OPO pumping and narrowband Raman spectroscopy. The NPS series boasts remarkable features such as up to 10W average output power, <7ps pulse width, and a 40MHz repetition rate. The transform-limited operation, with a spectral width of <0.3nm, and accurate central wavelengths make these lasers a suitable candidate for highly efficient amplification by Nd-doped DPSS amplifiers.

Onda Series

Onda 532nm: 532nm High Energy Laser

The Onda series is a DPSS nanosecond OEM laser platform designed for high-end applications requiring excellent beam quality and high peak power in materials such as metals, glass, plastics, and various delicate and hard materials. This compact and easy to use laser series is available in wavelengths of 266, 355, 532, and 1064nm, with an extended operating temperature range and superior performance to cost ratio. The Onda seriesinternal optical layout and accurate temperature management enable high output energies without compromising the lifetime of the THG and FHG stages. 

RPK Series

The RPK Series of multiple, single-emitter fiber-coupled diode lasers are available in wavelengths from 405nm thru 1550nm with up to ≈ 500W output power. Our specialized fiber-coupling techniques ensure high efficiency, stability, and superior beam quality, while rigorous inspections and burn-in procedures guarantee each product’s reliability, stability, and long lifetime. Highly customizable packages allow us to meet our customers’ specific needs, providing high-quality products at reasonable prices. 

RWLD Series

The RWLD series offers competitively priced laser diodes with high beam quality and a wide variety of products to support multiple applications. Available in a wide range of wavelengths, power levels, and packages. The RWLD wavelength options span from 405nm to 1650nm, with output powers in the range of 10 mW to 300 mW, packaged in a TO-18 package with photodiode. We also offer customized options, such as a customized wavelength, output power, or a special package to meet your specific needs.

RWLP Series

R3Z0-WSLP-905-050m-M-PD: 905nm Multimode Fiber Coupled Laser Diode

The RWLP series offers an affordable and versatile solution for your laser application needs with single-mode and multimode options and wavelengths from 405nm thru the IR region. With customizable options, our team can work with you to solve any challenges you may face. Rigorously tested for long-term reliability, the RWLP series ensures consistent performance and high beam quality. Perfect for integration, this series supports multiple applications including biological and analytical instrumentation. 

SOL Series

SOL-03-532: 532nm Nanosecond Laser

The SOL series is the most compact, air-cooled, Q-switched DPSS nanosecond laser available in the power range from 4W to 40W @ 1064nm. With its excellent beam quality, high peak power, wavelength options (10W and 650µJ at 532nm / 4W @ 355nm), and wide range of add-ons, this series is ideal for the most demanding industrial and scientific applications. With a rugged, compact, lightweight, and easy-to-use single-unit design, the SOL laser is easy to integrate into any system, providing superior operational flexibility and performance/cost ratio.