Industrial Lasers

Industrial Lasers Overview

Once known as a solution without a problem, the laser has found countless applications in modern industrial processes.  Lasers are used in material processing for applications ranging from machining to surface processing to thin films.  They have also found rapid acceptance in the field of processing and environmental monitoring with applications ranging from gas leak detection to machine vision solutions.  One monitoring application where lasers are uniquely suited is the field of particle counting, where the intensity of the scattered light corresponds to the size of the particle allowing for submicron particle detection.   Lasers are also widely used in test and measurement applications, for example using the photoluminescence to measure the bandgap energy in semiconductor fabrication.  Interferometry is also commonly utilized in industrial testing to measure surface defects down to a fraction of a wavelength of light.  Additionally, lasers are often used as OEM components that get integrated into larger systems, including a pump and seed sources for other lasers.  Here at RPMC lasers, we offer a wide range of diode, diode-pumped solid-state, and fiber lasers which are used all throughout the industrial process.

To learn more about the various industrial laser applications, click on any of the applications listed below,

or contact one of our laser experts today by calling 1-636-272-7222.

Applications

Here are some of the key applications we support in the Industrial Market.  If you have any questions, or would like support finding the right laser for your application, please Contact Us.

Select an Application to see products filtered by that Application

Micromachining

Micromachining

Surface Treatment

Thin Film Removal

Interferometry

Holography

Photoluminescence

LIBS

Maldi-TOF

Gas Sensing

Laser Doppler Velocimetry

Particle Measurement

Machine Vision

Raman Spectroscopy

Laser Pumps

Laser Seeds

Manufacturers – Industrial

While we have forged many trusted partnerships with industry-leading manufacturers, these laser manufacturers offer products specifically designed to ensure the success of your Industrial application.

BWT

Jenoptik

LDX

QLI

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Mode

Output

Narrow Linewidth

Series

Manufacturer

920 results found

Aero Series

Aero Laser by Bright SolutionsThe Aero Series is a high-energy DPSS laser that operates at less than 15 nanoseconds and with average power up to 200mJ at 1064nm and 100mJ at 532nm. All models come enclosed in an extremely compact and ruggedized single unit with a conductively cooled heatsink with a water-cooled option. It comes with available options for beam expanding and collimating optics. This new laser series is ideal for applications like LIBS, spectroscopy, and Atmospheric LIDAR.

Airtrac Series

AIRTRAC-6M: Low SWaP High Energy Laser

The AIRTRAC series, from Areté’s Associates, is a ruggedized, high-shock, ultra-compact, actively q-switched, low-SWaP, DPSS laser, available with >90 mJ of pulse energy. Fully compliant NATO STANAG 3733 configurations for laser designation are available in a complete system weighing less than 1 lb. The athermal design of the AIRTRAC ensures high laser pulse energy, stable performance over the full temperature range with low beam divergence.

BDL Series

BFL-CW1000: 1080nm Single mode Fiber LaserThe BDL Series is a high power direct diode turn-key system available in wavelengths of 915nm or 976nm. This easy to integrate, OEM laser diode module provides up to 3kW of power and unprecedented brightness.

CPFL Series

CPFL-1.5a: 1.5µm OEM Fiber LaserThe CPFL series is a Telcom grade compact 1.5um pulsed laser series available with up to 1W of average power and nanosecond to sub-nanosecond pulses. This telecom grade, fiber lasers enables a variety of applications including long range LIDAR and other “eye-safe” laser operations. The CPFL Laser is flexible format available at various pulse widths, repetition rates and center wavelengths to meet a variety of application requirements

Diadem Series

Diadem Series by Spark Lasers

DIADEM Series is a compact, air-cooled, high energy ultrafast laser for advanced micro-machining applications that require short femtosecond pulse widths. The Diadem is available with up to 40µJ of pulse energy, 30W of average power, and operation up to 1MHz (standard), with pulses below <400 fs and an M² < 1.2. This laser has been specifically designed for demanding medical implantable device and electronics manufacturing as well as high peak power optogenetics applications.

K Series

K445FTRFN-20.00W: 445nm Fiber Coupled Laser Diode

The K Series of multiple single emitter fiber coupled diode lasers are available in wavelengths from 405nm thru 1550nm with up to 300W output powers. These multi-emitter high power and high brightness diode lasers include options for aiming beam, photo detector, TEC, fiber detector, thermistor and a variety of package types.

Unik Series

UnikLaser Solo-780.24 QT

The Unik series of CW single-frequency lasers, featuring the Solo and Duetto configurations, are available at a variety of wavelengths with high average powers, making them well suited for a variety of highly specialized scientific and industrial applications. BRaMMS Technology® enables superior performance, high output powers, and outstanding beam properties in an overall compact footprint. The Unik Lasers Solo and Duetto series are utilized in a range of applications including holography, metrology, spectroscopy, and quantum technology.

EP Series

EP2108-DM-B: 2108nm DM Laser Diode 1950-2150nm

The EP series is a tunable single-frequency diode laser available in wavelengths from 1270nm thru 2300nm. Utilizing Eblana’s proprietary discrete-mode (DM) technology ensures excellent side mode suppression ratio (SMSR), without the mode hops inherent to most distributed feedback (DFB) lasers.

DX1 Series

EP2051-DM-DX1

The DX1 series is a tunable single-frequency diode laser in a compact turnkey laser system available in wavelengths from 1270nm thru 2300nm. Utilizing Eblana’s proprietary discrete-mode (DM) technology ensures excellent side mode suppression ratio (SMSR), without the mode hops inherent to most distributed feedback (DFB) lasers.

GBS Series

GBS-C: Broadband Light Source

The GBS Series of fiber laser modules are a Broad Band Source generating a non-coherent and broad ASE spectrum that combines the C and L-Band of the erbium with up to 22dBm of output power. ASE Broadband Sources are also available in the 1 µm band of the Ytterbium and the 2 µm band of the Thulium. All our Broad Band Sources are proposed in module format or in a Bench Top configuration.

GFL Series

GFLThe GFL series is a 1550nm, high-power, continuous-wave (CW) fiber laser, providing up to 2W of output power. This series offers power tunability ranging from 10%-100%, is available with standard or polarization-maintaining fiber with FC/APC fiber or an optional collimating lens, produces a perfect TEM00 beam, and offers high-speed triggering and modulation.

HFL Series

HFL: 1550nm High Power Pulsed Fiber Laser

HFL series is a high-energy, q-switched, wavelength stabilized, OEM fiber laser from Bktel, perfect for LiDAR and 3D scanning applications. This ultra-compact series offers high pulse repetition rates up to several MHz, 5W average power output (25W peak), up to 150µJ of pulse energy, pulse widths between 0.4 and 10ns, and delivers a perfect TEM00 output beam with fiber and collimating lens options.

HL Series

TG420

The HL Series of laser diodes are available in a wide range of wavelengths from violet to red and infrared in support of a broad range of applications. These applications include display, medical, biosciences, industrial tools (sensor, leveler), machine vision, scanners, printers and a myriad of other applications being developed in the industry.

HPFL Series

HPFL: CW Erbium Ytterbium Fiber Laser

The HPFL series is a high-power, continuous-wave (CW) fiber laser, providing up to 5W of output power @ 1.5µm, or 4W @ 2µm, from a single-mode fiber. This series offers power tunability ranging from 10%-100%, is available with standard or polarization-maintaining fiber with FC/APC fiber or an optional collimating lens, produces a perfect TEM00 beam, and offers high-speed triggering and modulation.

JDL Series

JDL-BAB-75-62-808-TE-200-1.0

The JDL Series of unmounted laser diode bars are available in CW or QCW configurations in wavelength from 760nm – 1064nm. Various emitter configurations and cavity lengths are available offering up to 200W CW and 500W QCW output powers.

JenLas D2

Jenoptik Jenlas D2.mini 2/3/5/8W

The JenLas D2 series of CW disk lasers with a wavelength of 532nm are available with up to 8W output power. These Nd:YVO4 or Yb:KYW solid state lasers are ideal for industrial micro material processing and medical treatments

Jenlas Fiber ns

Jenlas Fiber ns 105: 100W Nanosecond Fiber Laser

The Jenlas Fiber ns series of nanosecond pulsed fiber lasers at 1085nm are available with up to 105W, 190 to 250 nanoseconds pulse widths, and peak pulse powers of up to 8 kilowatts. for precise material processing and cutting applications.

JOLD-Open Heatsinks Series

The JOLD-Open Heatsinks Series are high quality high power laser diode bar products. They are available in a range of open heatsinks including the CS, CN, and LK package. And in wavelengths from 780nm – 1064nm.

JOLD-FC Series

JOLD-45-CPXF-1L

The JOLD-FC Series of high quality high power fiber coupled laser diode bar products are offered in wavelengths from 780nm – 1064nm and 30W to 400W output power.

JOLD-Stacks Series

JOLD-450-QAFN-5A: Laser Diode Stack w/ FAC

The JOLD-Stacks Series of high quality high power laser diode bar stacks. They are available with actively (microchannel) cooled or conductively cooled. And in wavelengths from 780nm – 1064nm.

K Stabilized Series

K878BN0RN-65.00W

The K Stabilized Series of wavelength stabilized fiber coupled diode lasers are available in wavelengths from 793nm thru 976nm with up to 300W output powers. These multi-emitter high power and high brightness diode lasers include options for aiming beam, photo detector, TEC, fiber detector, thermistor and a variety of package types.

LaserBoxx HPE Series

The LaserBoxx HPE series is a high power laser diode module offering excellent performance and reliability in a compact driver integrated laser head (Industry-standard compact package). It comes in free space multimode elliptical beam or with removable MM fiber coupling.

LDX Series

R1Z8-LDX-3215-735: 735nm Multimode Laser Diode

The LDX Series of high power multimode single emitter laser diodes include wavelengths of 400nm – 1900nm. Available in a wide range of output powers and package types.

LDX-Bar Series

R1Z8-LDX-4319-795: Laser Diode Bar Package

The LDX-Bar Series of multimode laser diode bars packaged on the industry standard CS package. Wavelengths in the red and IR are available and the output power range from 10W to 100W.

LGK Series

LGK 7785-100/150/200/250: 543nm Ultra-Reliable He-Ne Laser Modules

The LGK Series of Gas Lasers include a wide range of HeNe and Argon lasers with wavelengths at 488nm, 515nm, 543nm, 594nm, and 633nm.

LaserBoxx Low Noise Series

The LaserBoxx low noise Series is a CW diode laser module in a variety of diode wavelengths from 375 to 785nm, with output powers up to 350mW. This compact, self-contained laser module is available in turn-key or OEM versions and utilizes a proprietary alignment-free, monolithic resonator, and comes standard with a graphic user interface with remote diagnostics via USB, RS232, or direct I/O interface.

LRL Series

LRL2: 1.5um CW High Power Low RIN Fiber Laser

The LRL series is a 1550nm, high-power, continuous-wave (CW) fiber laser, providing up to 1W of output power from a single-mode fiber. This series offers power tunability ranging from 10%-100%, is available with standard or polarization-maintaining fiber with FC/APC fiber or an optional collimating lens, produces a perfect TEM00 beam, and offers high-speed triggering and modulation.

LaserBoxx SLM Series

The LaserBoxx-SLM Series is a single longitudinal mode (SLM) CW diode laser module available in wavelengths at 633nm, 785nm, and 830nm delivering ultra-narrow linewidths thanks to its excellent temperature stability and low noise current. The Oxxius proprietary, embedded firmware locks the laser on the same mode at each startup. This compact, self-contained laser module is available in turn-key or OEM versions and utilizes a proprietary alignment-free, monolithic resonator, and comes standard with a graphic user interface with remote diagnostics via USB, RS232, or direct I/O interface.

LTC-ISB2 Series

R1Z9-LTC-ISB2

The LTC-ISB2 (Integrated Spectral Bench) series from Luxmux, is a broadband multi-wavelength light source that combines up to 6 light sources into a single spectrum product. The system provides individual control of the light sources through a digitally controlled interface. The ISB is a highly integrated solution offering exceptional operational control in a fully self-contained module. Custom, powerful and compact, the ISB is well positioned for integration into a variety of sensing and measurement applications.

LTC-OSE Series

R1Z6-LTC-OSE-1265-1605: BeST-SLED 1300nm 1340nm 1390nm 1430nm 1480nm 1550nm

The LTC-OSE series from Luxmux, trade named BeST-SLED®, can be configured with up to 6 super luminescent diodes and driver circuitry, into a single 32 pin butterfly package. This reliable, cost-effective, rugged broadband light source produces overlapping spectral coverage from 1230nm to 1730nm, generating up to 19 spectral combinations, and average powers up to 50mW. The LCT-OSE series is suitable for direct integration into existing OEM products for Optical Coherence Tomography, Optical Sensing, White Light Interferometry and others.

MFL Series

MFL-1.5: 1.5 CW Fiber Laser

The MFL series is a high-power, continuous-wave (CW) fiber laser, providing up to 20W of output power @ 1.5µm, 40W @ 2µm, or 60W @ 1µm, from a single-mode fiber. This series offers power tunability ranging from 10%-100%, is available with standard or polarization-maintaining fiber with FC/APC fiber or an optional collimating lens, produces a perfect TEM00 beam, and offers high-speed triggering and modulation.

MLRL

Pulsed Fiber Laser

The MLRL series is a high-energy, modulated, wavelength stabilized, OEM fiber laser, providing up to 2W of output power @ 1.5µm wavelength, delivered via FC/APC or SC/APC fiber connector. This ultra-compact, q-switched series offers repetition rates up to 500kHz, pulse widths between 50ns and 300ns, high-speed external, TTL, or LVDS triggering, and a perfect TEM00 beam output.

Nps Series

Nps-1064-10

The new, ultrafast Nps-1064-10 is a 1064nm laser, featuring 10mW average output power, < 7ps pulse width, and a 40MHz repetition rate. The transform-limited operation, with a spectral width of < 0.3nm, and remarkably accurate central wavelength (1064.3 +/- 0.1nm) make the Nps-1064-10 laser a suitable candidate for highly efficient amplification by Nd-doped DPSS amplifiers. Therefore, opening the way to nonlinear optics applications like OPO pumping, and narrowband Raman Spectroscopy.

Onda Series

Onda 532nm: 532nm High Energy Laser

The Onda Series is a DPSS nanosecond OEM laser platform aimed at high-end applications requiring both excellent beam quality and high peak power in materials such as metals, glass, plastics, and various delicate and hard materials. Developed initially as a high-energy seeder for advanced MOPA laser systems, the Onda is now available as a standalone device operating at the wavelengths of 266, 355, 532 and 1064nm. The compactness and ease of use allow for superior operation flexibility and performance / cost ratio.

One Series

One-1030-100: 1030nm Miniature Q-Switched Laser

The One Series is a compact, passively q-switched laser operating at the fundamental wavelength of 1030nm. Available in a high energy configurations (up to 100uJ) as well as a high average power configurations (up to 3W). The One Series can be configured in a fixed operational rep rate configuration, or an externally triggerable configuration. The One series is utilized in a variety of applications spanning from material process to air-borne LiDAR.

Q-TUNE Series

Q-TUNE-IR

The Q-TUNE series is a high energy, compact, tunable wavelength laser consisting of an Optical Parametric Oscillator (OPO) capable of producing a tunable wavelength range of 410-2300 nm with a linewidth narrower than 6 cm-1. Optional second harmonic generator extends the tuning range to 210-410 nm.
The combination of a pulse duration shorter than 5ns and an upper repetition rate of 100Hz, makes the Q-TUNE a perfect coherent light source for temporally resolved spectroscopy, metrology, photo-acoustic imaging and remote sensing applications.

Q-TUNE-IR

Q-TUNE-IR The Q-TUNE-IR uses an Optical Parametric Oscillator (OPO) to produce tunable wavelength in 1380 – 4500 nm range with a linewidth less than 10 cm-1, achieving > 6.5mJ of pulse energy @ 3500nm for the F-10 configuration (> 2mJ @ 3500nm for C-10) with a 10Hz repetition rate. A broadband version with linewidth up to 200 cm-1 is also available by request.  The Q-TUNE-IR requires little maintenance, with all laser electronics integrated into the housing, including an air-cooling system, eliminating the need for chillers, or large power supplies, all while providing a guaranteed pump diode lifetime greater than 2 giga-shots.

Q-SHIFT Series

Q-Shift SeriesThe Quantas-Q-SHIFT family of Q-switched DPSS lasers feature a built‑in nonlinear wavelength conversion stage, allowing the production of wavelengths that are not accessible with conventional solid-state laser sources, including 1163, 1177, 1300, 1317, 1551 and 1571nm. An optional harmonics generator is also available for for the Q-SHIFT, allowing generation of up to the 4th harmonic for each fundamental wavelength.

Q-Spark

Quantas-Q-SPARK-266: High energy, compact, nanosecond, DPSS laser

The Q-SPARK series, from Quantum Light Instruments Ltd., features a short <1.5 ns pulse with pulse energies up to 10 mJ. Due to the short cavity design, pulse durations of <800ps are achievable with pulse energies up to 5mJ. The innovative water-free laser crystal end-pumping technology produces a Gaussian-like, low divergence, high peak power laser beam in compact, air-cooled package.

Q1 Series

Quantas-Q1-211: High energy, compact, nanosecond, DPSS laser

The Q1 series is a compact, energy-efficient, diode pumped, air-cooled, Q-switched laser available at 1064 and 1053nm with up to 45 mJ of pulse energy and rep rates up to 50Hz. The high peak powers and low divergence of the Q1 series enable efficient harmonic conversion through the 5th harmonic (213 or 211nm). The innovative laser design has resulted in a user-friendly, turnkey system that requires little maintenance.

Q2 Series

Quantas Q2 QLI

The Q2 series is a versatile, diode pumped, air-cooled, Q-switched laser capable of achieving up to 80mJ of pulse energy with an operational rep rate up to 100Hz. Available at the fundamental wavelengths of 1064 and 1053nm, the innovative water-free laser crystal end-pumping technology produces Gaussian-like, low divergence laser beams with high peak powers, enabling efficient harmonics conversion through the 5th harmonic.

Q2HE Series

Quantas-Q2HE-211: High energy, compact, nanosecond, DPSS laser

The Q2HE series, from Quantum Light Instruments Ltd., features an innovative water-free laser crystal cooling technology that enables generation of high quality laser beams with up to 100 mJ pulse energy and/or up to 4 W of average output power. Featuring a pulse duration of less than 7 ns and a low beam divergence, the Q2HE is capable of achieving efficient fundamental wavelength conversion through the 5th harmonics of 213/211 nm.

R Series

The R series of wavelength stabilized single mode and multimode laser diodes offer narrow wavelength spectrum in wavelengths from 633nm thru 1064nm. Package options range from components as basic as a TO-56 or 14-pin BF packaged diodes, to OEM modules including electronics, to UL/CE and IEC certified turn-key systems.

SM Series

The SM Series of high power single mode laser diodes in wavelengths of 795nm – 1064nm, are available in a wide range of output powers up to 450mW and package types ranging from chip on submount to fiber coupled butterfly package.

Microchip Series

Bright Microlaser Microchip SB1 Laser

The Microchip Series, available in the FP3 and P4 packages from BrightMicroLaser, are ultra-compact, passively q-switched DPSS lasers that feature pulse durations from 350 ps to 3 ns, energy levels up to 100 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.

Sirius Series

Sirius-532: Picosecond DPSS lasers

SIRIUS is a very compact, high energy hybrid ultrafast laser for advanced micro-machining applications and supercontinuum pumping, offering over 120µJ and > 5 W, with pulses below 10 ps from single shot to 1MHz and an M² of < 1.2. This laser series specifically designed to allow for ergonomic and user-friendly operation. SIRIUS is ideally suited for selective ablation, electronics, and photonic applications.

SOL Series

SOL-03-532: 532nm Nanosecond Laser

The SOL Series is the most compact Q-switched Diode Pumped Solid State laser available in the power range from 6W to 40W @ 1064nm. Sol versions @ 532nn are also available with the same footprint. These air-cooled DPSS lasers are offered in a rugged and lightweight Single Unit, designed to allow easy and reliable integration in micro-machining and marking applications. Compactness, insensitivity to environmental conditions and ease of handling guarantee superior operation flexibility and performance/cost ratio.

TBS Series

TBS-CL:

The TBS series of table top fiber lasers is a Broad Band Source generating a non-coherent and broad ASE spectrum that combines the C and L-Band of the erbium with up to 22dBm of output power. ASE Broadband Sources are also available in the 1 µm band of the Ytterbium and the 2 µm band of the Thulium. All our Broad Band Sources are proposed in module format or in a Bench Top configuration.

TG Series

R1Z5-TG420

The TG Series of laser diodes emit in the spectral range from 420nm up to 460 nm with a typical output power of 50mW and an absolute maximum output power of 100mW. Assembled in a 5.6 mm (TO-56) packages the TG series is a suitable for a wide range of OEM applications that require blue/violet light.

THFL Series

THPOA-2: 2 µm Band, Ultra High Power Optical Amplifier

The THFL series is a high-power, continuous-wave (CW) fiber laser, providing up to 30W of output power @ 1550nm, 40W @ 2µm, or 100W @ 1064nm, from a single-mode fiber. This series offers power tunability ranging from 10%-100%, is available with standard or polarization-maintaining fiber with FC/APC fiber or an optional collimating lens, produces a perfect TEM00 beam, and offers high-speed triggering and modulation.

QCL Series

mirSense Product Family

The QCL series is a high power pulsed Quantum Cascade Laser based on proprietary technology which incorporates high-powered diodes (typically watt-level) emitting in the main transmission bands of the atmosphere (4.0µm, 4.6µm, 4.8µm, 9.x µm). The ITAR free MirSense technology exhibits outstanding performance in terms of power and wall-plug efficiency. This high-performance QCL laser assembly takes full advantage of MirSense’s state of the art technologies.

VD Series

VD-0940I-004W-1C-2A0: 940nm VCSEL Diode

The VD Series of Vertical Cavity, Surface Emitting Laser (VCSEL) emitters, and arrays are available in a wide range of output powers in wavelengths of 850nm and 940nm.  Standard options include VCSEL, VCSEL w/ Diffusor, VCSEL & PD w/ Diffusor, and pulsed VCSELs.  These low-cost lasers are ideal for a wide range of consumer products.

Vento Series

Vento-532-7: 532nm Picosecond DPSS Laser

The Vento Series of sub-ns DPSS active Q-Switched lasers produce pulses in the hundreds of ps range with average power up to 50 W @ 532 nm and up to 100 W @ 1064 nm. Ideal for micromachining, fine cutting and precision LIDAR, all the models are enclosed in an extremely compact and ruggedized single unit with both air-cooled and water-cooled options available.

Wedge Series

Wedge-XF-1064: 1064nm Picosecond Laser

The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.

WSLD Series

WSLD-980-001-2-PD

The WSLD series of laser diodes, from WaveSpectrum, are available in a wide range of wavelengths, power levels, and packages. The WSLD wavelength options span from 405nm to 1920nm, with output powers in the range of 20mW to several watts, packaged in standard C, E, and H-Mount packages, as well as a variety of TO-can options.

WSLP Series

R3Z0-WSLP-905-050m-M-PD: 905nm Multimode Fiber Coupled Laser Diode

The WSLP series of fiber coupled laser diodes are variable in both multimode and single mode configurations, with wavelengths from 405nm thru the IR. The highly reliable WSLP series is suitable for a variety of applications such as biological and analytical instrumentation.