1-9uJ Pulse Energy Lasers
Unlike continuous-wave lasers, the output of pulsed lasers cannot be specified by their output power alone. This is because the output power of a pulsed laser is determined by three different parameters the laser’s pulse width, pulse energy, and pulse repetition rate.
Contact us today to let one of our knowledgeable Product Managers assist you!
Picture | Part Number | Type | Wavelength (nm) | Output power (W) | Mode | Output | Rep rate | Q-switch type |
---|---|---|---|---|---|---|---|---|
1.5um Pulsed Fiber Lasers | Pulsed Fiber Lasers | 1530-1564 | 0.150, 1.0, 4.0 | 5kHz, 1MHz, 2MHz | Active | |||
Iris-447 | Pulsed DPSS Lasers | 447 | 1.0, 2.0 | 50kHz to 100kHz | Active | |||
Quantas-Q1-213 | Pulsed DPSS Lasers | 213 | 0.005, 0.010, 0.020 | 10Hz | Active | |||
SB1-266 | Microchip Lasers, Pulsed DPSS Lasers | 266 | 0.002, 0.005 | 1kHz, 5kHz, 10kHz | Passive | |||
SB1-355 | Microchip Lasers, Pulsed DPSS Lasers | 355 | 0.010 | 10kHz | Passive | |||
SB1-473 | Microchip Lasers, Pulsed DPSS Lasers | 473 | 0.0009, 0.010, 0.015 | 100Hz, 5kHz, 10kHz | Passive | |||
SB1-946 | Microchip Lasers, Pulsed DPSS Lasers | 946 | 0.004, 0.060, 0.070, 0.105 | 100Hz, 5kHz, 10kHz | Passive |