microjoule Pulse Energy Lasers 

Lasers with 0-999uJ pulse energy. Unlike continuous-wave lasers, the output of pulsed lasers cannot be specified by their output power alone.  This is because the output power of a pulsed laser is determined by three different parameters the laser’s pulse width, pulse energy, and pulse repetition rate.

Contact us today to let one of our knowledgeable Product Managers assist you!

Picture Part Number Description Wavelength (nm) Type
Pulsed Fiber Laser BK-FL-Pulsed Fiber Laser, ns/ps pulsed, 1030-1053nm, up to 500uJ, up to 5W, 400ps to 10ns 1030-1100, 1540-1560 Pulsed Fiber Lasers, "Eye Safe", Low SWaP, Ruggedized, Customizable
ER902 DPSS Laser, ns pulsed, 1535nm, 200uJ, Single Shot-10Hz, 1535 Pulsed DPSS Lasers, Mil-Spec Lasers, "Eye Safe", Low SWaP, Made in the USA, Customizable
rendering of a CAD drawing of a compact, modern, OEM, DPSS laser housing Iris DPSS Laser, ns pulsed, 447 or 671nm, up to 4W, up to 100kHz 447, 671 Pulsed DPSS Lasers, Low SWaP, Adjustable Rep Rate, Adjustable Pulse Width, Low Jitter, Nanosecond Lasers
sleek modern gray colored Jasper Flex compact high-power all-fiber femtosecond & picosecond laser oscillator Jasper Flex Fiber Laser, fs/ps pulsed, 1030nm, up to 30W, up to 1MHz, up to 100µJ, <270fs-8ps, Single Shot - 20MHz 1030 Pulsed Fiber Lasers, Ultrafast Lasers, Ruggedized, Adjustable Rep Rate, Adjustable Pulse Width, Femtosecond Lasers, Picosecond Lasers
sleek modern gray colored Jasper Micro compact all-fiber femtosecond & picosecond laser oscillator Jasper Micro Fiber Laser, fs/ps pulsed, 1030nm, up to 7W, up to 5µJ, <270fs-8ps, Single Shot - 20MHz 1030 Pulsed Fiber Lasers, Ultrafast Lasers, Ruggedized, Adjustable Rep Rate, Adjustable Pulse Width, Femtosecond Lasers, Picosecond Lasers
sleek modern gray colored Jasper X0 high-power all-fiber femtosecond & picosecond laser oscillator with 5-year warranty ribbon Jasper X0 Fiber Laser, fs/ps pulsed, 1030nm, up to 60W, up to 200µJ, <270fs-8ps, Single Shot - 20MHz 1030 Pulsed Fiber Lasers, Ultrafast Lasers, Ruggedized, Adjustable Rep Rate, Adjustable Pulse Width, Femtosecond Lasers, Picosecond Lasers
Image of a modern OEM laser housing made of high-grade aluminum, long silver rectangle body with fan slits, output window and stickers Lampo DPSS Laser, ps pulsed, 266-1064nm, up to 4.5MW, up to 250µJ, 50kHz-40MHz 266, 355, 532, 1064 Pulsed DPSS Lasers, Ultrafast Lasers, Ruggedized, Adjustable Rep Rate, High Peak Power, Picosecond Lasers
sleek modern black all-in-one laser micromachining system with attached microscope objective and camera MicroMake MicroMake Micromachining System, ns/ps pulsed,  266-532nm, up to 40kW, up to 100kHz 266, 532 Pulsed DPSS Lasers, Ruggedized, High Peak Power, Nanosecond Lasers, Picosecond Lasers
neoMOS DPSS Laser, ps/fs Pulsed, 1064nm, up to 100W, up to 500µJ, up to 80MHz 1064 Pulsed DPSS Lasers, Ultrafast Lasers, Ruggedized, Adjustable Rep Rate, Customizable, Femtosecond Lasers, Picosecond Lasers
Onda 1064nm Onda DPSS Laser, ns pulsed, 266-1064nm, up to 800µJ, up to 100kHz 266, 355, 532, 1064 Pulsed DPSS Lasers
One-1030-100: 1030nm Miniature Q-Switched Laser One DPSS Laser, ns pulsed, 10XX nm, up to 4W, up to 200µJ, 5-20 ns, passive Qsw up to 30kHz 1030, 1047, 1064 Pulsed DPSS Lasers
sleek, modern, light grey colored OPO & DPSS laser housing Q-TUNE-HR Tunable DPSS Laser, OPO, ns Pulsed, 750-1800 nm, up to 100 µJ, up to 100 kHz Tunable Pulsed DPSS Lasers, Tunable Lasers
Bright Microlaser Microchip SB1 Laser SB1-IR DPSS Laser, ns/ps pulsed, 946-1064 nm, up to 80µJ, up to 100kHz 946, 1064 Pulsed DPSS Lasers, Microchip Lasers, Airborne Laser, Single Longitudinal Mode (SLM), Low SWaP, Ruggedized
Bright Microlaser Microchip SB1 Laser SB1-UV DPSS Laser, ns pulsed, 236.5-355nm, up to 2µJ, up to 10kHz 236.5, 266, 355 Pulsed DPSS Lasers, Microchip Lasers, Airborne Laser, Single Longitudinal Mode (SLM), Low SWaP, Ruggedized
Bright Microlaser Microchip SB1 Laser SB1-VIS DPSS Laser, ns/ps pulsed, 473-532nm, up to 40µJ, up to 100kHz 473, 532 Pulsed DPSS Lasers, Microchip Lasers, Airborne Laser, Single Longitudinal Mode (SLM), Low SWaP, Ruggedized
sleek modern dpss laser housing, simple cubic design, black and red with optical fiber & connector SL-Pico Supercontinuum Laser, ps pulsed, White Light, 410-2400nm, up to 200MHz 410-2400 Supercontinuum Laser, Broadband Lasers
sleek modern dpss laser housing, simple cubic design, black and blue TLS-Blue-Fixed-Bandwidth Tunable Supercontinuum Laser, Broadband, ps pulsed, 410-1700 nm, up to 200MHz Tunable Supercontinuum Laser, Broadband Lasers, Tunable Lasers
sleek modern dpss laser housing, simple cubic design, black and red TLS-Red-Tunable-Bandwidth Tunable Supercontinuum Laser, Broadband, ps pulsed, 410-1700 nm, up to 200MHz Tunable Supercontinuum Laser, Broadband Lasers, Tunable Lasers
Pulsed Lasers FAQs
What is a Pulsed Laser?
What is a Pulsed Laser?

A pulsed laser is any laser that does not emit a continuous-wave (CW) laser beam. Instead, they emit light pulses at some duration with some period of ‘off’ time between pulses and a frequency measured in cycles per second (Hz). There are several different methods for pulse generation, including passive and active q-switching and mode-locking. Pulsed lasers store energy and release it in these pulses or energy packets. This pulsing can be very beneficial, for example, when machining certain materials or features. The pulse can rapidly deliver the stored energy, with downtime in between, preventing too much heat from building up in the material. If you would like to read more about q-switches and the pros and cons of passive vs active q-switches, check out this blog “The Advantages and Disadvantages of Passive vs Active Q-Switching,” or check out our Overview of Pulsed Lasers section on our Lasers 101 Page!

What is the best laser for LIDAR?

What is the best laser for LIDAR?

There are actually numerous laser types that work well for various LIDAR and 3D Scanning applications. The answer comes down to what you want to measure or map. If your target is stationary, and distance is the only necessary measurement, short-pulsed lasers, with pulse durations of a few nanoseconds (even <1ns) and high pulse energy are what you’re looking for. This is also accurate for 3D scanning applications (given a stationary, albeit a much closer target), but select applications can also benefit from frequency-modulated, single-frequency (narrow-linewidth) fiber lasers. If your target is moving, and speed is the critical measurement, you need a single-frequency laser to ensure accurate measurement of the Doppler shift. If you want to learn more about the various forms of LIDAR and the critical laser source requirements, check out our LIDAR page for a list of detailed articles, as well as all the LIDAR laser source products we offer. Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What is the best laser for tattoo removal?

What is the best laser for tattoo removal?

Similar to laser hair removal, laser tattoo removal utilizes a process known as selective photothermolysis to target the embedded ink in the epidermis and dermis.  Photothermolysis is the use of laser microsurgery to selectively target tissue utilizing specific wavelengths of light to heat and destroy the tissue without affecting its surroundings.  In laser tattoo removal this is accomplished by using a focused q-switched laser with a fluence of approximately 10 J/cm2, to heat the ink molecules locally.  Since the q-switched laser’s pulse duration (100 ps to 10 ns) is shorter than the thermal relaxation time of the ink molecules it prevents heat diffusion from taking place.  In addition to minimizing damage to the surrounding tissue, this rapid localized heating results in a large thermal differential, resulting in a shock wave which breaks apart the ink molecules. If you would like more details on pulsed lasers for tattoo removal applications, see our Aesthetics Lasers page here! Get more information from our Lasers 101, Blogs, Whitepapers, and FAQ pages in our Knowledge Center!

What is the best laser type for multi-photon microscopy?

What is the best laser type for multi-photon microscopy?

Multiphoton excitation requires high peak power pulses. Previously, wavelength tunable Ti:Sapphire lasers dominated this area, leading to the development of standard methods using a conventional pulse regime with typically 100-150 fs pulse duration, 80 MHz repetition rate, and watt level average power with specific wavelengths such as 800 nm, 920 nm, and 1040-1080 nm. Recently, femtosecond pulsed fiber lasers have started becoming the optimal solution due to their low relatively low fluence, limiting damage to living samples. Other advantages provided by fs fiber lasers include a more attractive price point, very compact and robust format, high electrical efficiency, high reliability, and less maintenance of cost of ownership. If you would like more details on why fs fiber lasers are becoming the optimal choice for multi-photon excitation applications, read this article: “Higher Power fs Fiber Lasers to Image Better, Deeper & Faster.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What is the difference between active and passive q-switching?
What is the difference between active and passive q-switching?

There are a wide variety of q-switch technologies, but the technique as a whole can be broken down into two primary categories of q-switches, passive and active. Active q-switches could be a mechanical shutter device, an optical chopper wheel, or spinning mirror / prism inside the optical cavity, relying on a controllable, user set on/off ability. Passive q-switches use a saturable absorber, which can be a crystal (typically Cr:YAG), a passive semiconductor, or a special dye, and automatically produce pulses based on it’s design. Both passive and active q-switching techniques produce short pulses and high peak powers, but they each have their pros and cons. When choosing between actively q-switched and passively q-switched lasers, the key is to understand the tradeoffs between cost/size and triggering/energy and decide which is best for your particular application. Read more about these tradeoffs in this article: “The Advantages and Disadvantages of Passive vs Active Q-Switching.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

What type of laser is used for LIBS?
What type of laser is used for LIBS?

A laser source used for LIBS must have a sufficiently large energy density to ablate the sample in as short a time possible. Typically, pulsed DPSS lasers take center stage here. However, it’s been shown that pulsed fiber lasers can also be a great option. For example, you could utilize fiber lasers to measure detection limits as low as micrograms per gram (µg/g) for many common metals and alloys, including aluminum, lithium, magnesium, and beryllium. Analytical performances showed to be, in some cases, close to those obtainable with a traditional high-energy Nd:YAG laser. The beam quality of fiber lasers, in conjunction with longer pulse widths, resulted in significantly deeper and cleaner ablation craters. If you want to learn more about LIBS and ideal laser sources, check out either this blog: “OEM Fiber Lasers for Industrial Laser Induced Breakdown Spectroscopy,” or this blog: “Laser Induced Breakdown Spectroscopy (LIBS) in Biomedical Applications.” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!

Which IR laser is best for laser target designation?
Which IR laser is best for laser target designation?

There are many different types of laser designation systems used by the military today. Still, they all share the same basic functionality and outcome. At a glance, the laser requirements seem relatively straightforward. The laser needs to be invisible to the human eye, and it needs to have a programmable pulse rate. Still, when you look in more detail, many small factors add up to big problems if not appropriately addressed. Excellent divergence and beam pointing stability, low timing jitter, and rugged, low SWaP design are all critical features of a good laser designation source. Read more on these critical features in this article: “What are the Critical Laser Source Requirements for Laser Designation?” Get more information from our Lasers 101, Blogs, Whitepapers, FAQs, and Press Release pages in our Knowledge Center!