Thin Film Removal Lasers Overview
Laser thin film removal is the process of selectively ablating a very thin layer of material from a substrate, and is widely used on silicon, glass, ceramics, plastics, and metals. Thin-film removal lasers are generally short-pulsed with the ability to operate at high repetition rates to allow for sufficient pulse overlap at high processing speeds without damaging the substrate. Additionally, thin-film removal lasers must have very high beam quality and a high degree of accuracy. The wavelengths of choice for these lasers are typically in the ultraviolet region in order to minimize depth penetration, but infrared lasers are still used in some cases. On this page, you will find a list of all of the thin film removal lasers.
RPMC has years of experience supporting Thin Film Removal applications, helping industry professionals select the right tool for the job.
Contact Us today to let one of our knowledgeable Product Managers assist you!
|Picture||Part Number||Type||Wavelength (nm)||Output Power (W)||Mode||Output||Narrow Linewidth||Pulse Energy (uJ)||Pulse Width||Rep Rate|
|BLM-1534||Pulsed DPSS Lasers||1534||0.001||1000.0||10ns||1Hz|
|Jenlas Fiber ns 105||Pulsed DPSS Lasers, Pulsed Fiber Lasers||1085||100.0||1000.0||150ns||100kHz, 200kHz|
|Onda 1064nm||Pulsed DPSS Lasers||1064||15.0||800.0||2ns to 10ns||Single Shot to 100kHz|
|Onda 266nm||Pulsed DPSS Lasers||266||1.0||80.0||2ns to 6ns||Single shot to 50kHz|
|Onda 355nm||Pulsed DPSS Lasers||355||0.300||150.0||3ns||Single shot to 2kHz|
|One-3-1||Pulsed DPSS Lasers||1030||3.0||100.0||10ns to 20ns||30kHz|
|Quantas-Q-SPARK-1064||Pulsed DPSS Lasers||1064||0.010||10000.0||800ps, 2ns||100Hz|
|Quantas-Q-SPARK-266||Pulsed DPSS Lasers||266||0.010||1500.0||2ns||20Hz|
|Quantas-Q-SPARK-355||Pulsed DPSS Lasers||355||0.010||2500.0||2ns||20Hz|
|Quantas-Q-SPARK-532||Pulsed DPSS Lasers||532||0.010||2500.0||2ns||20Hz|