NEW! High Powered Industrial
Nanosecond Laser
The new BLAZE series of industrial nanosecond las ers offers a higher level of throughput and process stability in industrial ns-laser micromachining. This laser offers more than 100 W TEM00 power at 1064 nm, and more than 50 W at 532 nm. The BLAZE offers a new feature: SpotLock: This stands for superior stability of focus diameter and location of its centroid (pointing stability) at all pulse repetition rates! This extraordinary stability can be achieved in a passive, reliable way – based on novel, proprietary, smart pump technology at 888 nm for Nd:YVO4. Repetition rates up to 200 kHz allow for high throughput and cost efficiency in various industries like photovoltaics, semicon and automotive or tool machining.
|
| |
BLAZE 1064 - 100 |
BLAZE 532 - 50 |
| Wavelength |
1064 nm |
532 nm |
| Output Power |
100W @ 100kHz |
50W @ 100kHz |
| Pulse Repetition Frequency |
40 - 200kHz |
80 - 180kHz |
| Spatial mode |
TEM00 (M2 < 1.3) |
TEM00 (M2 < 1.3) |
| Pulse duration |
< 60 ns @ 100 kHz |
< 60 ns @ 100 kHz |
| Pulse-to-pulse energy stability (RMS 1sigma) |
< 3% |
< 5% |
| Average power stability over 8 hours (RMS 2 sigma) |
< 1% |
< 2% |
| Polarization Ratio |
> 100:1 Horizontal |
> 100:1 Horizontal |
| 1/e² beam diameter at output |
3.5mm |
3.5mm |
| Beam waist location |
at output |
at output |
| Beam divergence, full angle |
< 0.6mrad |
< 0.3 mrad |
| Beam circularity |
> 90% |
> 90% |
| Waist diameter stability in full PRF range |
<5% |
< 10% |
| Beam-pointing stability in full PRF range |
< 2% of divergence |
< 3% |
| Bore-sight accuracy |
± 1 mm and ± 5 mrad |
± 1 mm and ± 5 mrad |
| Warm up time |
< 15 min from cold start |
< 45 min from cold start |
| Supply requirements (water-air chiller included) |
| Voltage |
100, 115, 208, 230 V AC switchable, 50/60Hz |
Dimensions |
| Laser head |
755 x 277 x 185 mm (L x W x H) |
| Power Supply |
3U 19" rack mount, 500mm deep |
| Chiller |
6U 19" rack mount, 500mm deep |
|
| Laser Head |
40 kg |
| Power Supply |
15 kg |
| Chiller |
42 kg |
| Umbilical length |
5 m (other lengths on demand) |
Features:
-
100 W @ 100kHz (1064 nm), 40-200kHz operation
-
50 W @ 100 kHz (532nm), 80 - 180 kHz operation
-
High beam quality M²<1.3
-
SpotLock: Superior beam parameter and pointing stability across the complete PRF range
-
Field replaceable pump diodes
-
Optional Pulse-On-Demand: freely-adjustable pulse energy at all PRF and from pulse to pulse
-
Industry standard form factor
|
Click here for a company profile.
Click here to view LUMERA Laser technical papers
These components do not comply with the Federal Regulations (21 CFR Subchapter 1) as administered by the CDRH. Purchaser acknowledges that their products must comply with these regulations before they can be sold to a customer. The export of these components is controlled by the U.S. Department of Commerce, Bureau of Export Administration - www.bis.doc.gov/
|
